WAC Lighting Modern Forms F-RC-WT Operation Instructions

Google Assistant Package Contents Pairing To pair your remote control: 1. Power cycle your fan by turning off the power at the circuit breaker. 2. Press and hold and buttons on remote control for 10-15 seconds. 3. The LED will blink green then remain solid green. 4. The green LED along with audible beeps will indicate that pairing is successful. 5. Test remote control using the steps in section 2. 1 button: Switch between Summer and Winter Mode. SUMMER MODE (Counter-Clockwise): A downward airflow creates a cooling effect (FIG. 3). This allows you to set your air conditioner ...

NOTE: This function only resets the Wi-Fi credentials. 1. Press and hold the and buttons for 6 sec. 2. The LED will light red, blink green, and return to solid red, and the receiver will beep to indicate that Wi-Fi reset is successful. 3. After the Wi-Fi resets, the fan will broadcast its service set indicator (SSID). 4 5 Factory Reset NOTE: This will remove remote control and app connections. Remote Control Factory Reset: 1. Press and hold the , and buttons for 10 seconds. 2. The LED will blink red and return to solid red, and the receiver will beep to indicate that the factory reset is successful. Receiver Button Fact ...