VMP FP-MFTB Instruction Sheet

Text of VMP FP-MFTB Instruction Sheet

Instruction Sheet For:

For more information, please contact us at: 345 Log Canoe Circle, Stevensville, Maryland 21666 Toll Free: 877.281.2169 Phone: 410.643.6390 Fax: 410.643.6615 www.videomount.com

Side Wall A

1 3 Side Wall B 1 4 Side Wall C 1 5 Side Wall D 1 6 Tilt Bracket 2 7 Top Hook 2 8 Leveler 2 9 Securement Bracket 2 10 Kick Stand 2 11 Socket Screw M8*P1.25*L20 4 12 Socket Screw M6*P1.0*L40 2 13 Screw M5*P0.8*L60 4 14 Screw M5*P0.8*L10 8 15 Washer 5.3* 10*T1.0 8 16 Screw M5*P0.8*L25 2 17

Lay out all parts to your mount and match them to the parts list

provided. Verify that you have all your parts before attempting to assemble the mount. Step 2 Before starting, make sure to tighten the socket screw at the top of the tilt brackets as far as it will go to raise the brackets to the maximum height. Also take this time to make sure the screws ) on the side of the top hook and the screws that attach the sec

WARNING: The installer of these products must verify that

the mount surface, ceiling or wall, will safely support the combined weight of all attached equipment and hard­ ware. Video Mount Products will not be held liable for the improper use or installation of its products. Enjoy Your Mount! Step 5: Securing the mounting brackets Step 5 To wire the flat panel, pull the bottom of the flat panel up and lower the kick stand (#10on both tilt brackets. Attac

VMP Racks & Stands Owners Instructions: