VideoLabs MicroscopeCam Installation Manual

Using VideoLabs Cameras Plugging it in 2 Turning it on 2 Positioning the Camera 3 Focusing the Lens 3 Using the IllumaBase 3 Compatibility 4 Lighting 4 Audio 4 Microscope Adapters/Accessories 5 Troubleshooting 6 General Precautions 6 Warranty 7 ...

the camera, plug the non-labeled end of the cable into the base of the camera. •Plug the connector labeled “Video” into a standard NTSC or PAL “S- Video-in” jack on a video digitizer board, VCR or TV. •An S-video adapter (Fig. 1) is included for converting the signal f ...

Focusing the Lens… C-Mount Lens Models… Using the lllumaBase… You can position your camera in two ways. First, you can adjust the angle of the camera head. The camera head is swivel- mounted; you can turn it 30° to the left or right. (DO NOT turn it more than 30° or you may damage the camera. When you feel a natural resista ...

with almost all computer video capture and digitizer boards. Your camera can be used with video digitizer boards for Apple Macintosh and Pcs. Lighting the subject, in all photography and video production, is crucial to get- ting the best video images ...

FlexLite (Fig.3) (Teachcam, Studentcam, Medcam and Microscopical models) The Teachcam, Studentcam, Medcam and Microscopical models include a custom-metal eyepiece adapter and 28 & 34mm plastic couplers. To use the metal adapter properly, unscrew and remove the eyepiece from the microscope and slide the narrow end of t ...

FlexCam ID camera includes a 1 6mm C-mount (inter changeable) lens. (See page 6 for C-mount lens instructions:) In addition, you’ll notice 2 buttons on the base of your FlexCam ID unit. These buttons are a part of its Iris Control System (lCS) and will adjust to any lighting environment. Simply press the light button (on the rig ...

S-video has a small plug with four small pins in it. Composite has a slightly larger plug with one big pin in it. If you still don't see video, hook your video source up to a VCR and see if you can get video that way. lf you DO get video that ...

A1l defects and faulty workmanship in the camera for one year, five years for the gooseneck. WHO IS COVERED As the original purchaser of the camera, you are covered under this warranty. LENGTH OF WARRANTY One Year. The warranty will be extended to a five year limited if the original purchaser returns the warranty card with ...