Victaulic VE268 Operating And Maintenance Instruction Manual

VE268 and VE269 Pipe Roll Grooving Tools WARNING Original Instructions WARNING Failure to follow instructions and warnings could result in death, serious personal injury, property damage, and/or product damage. • Before operating or servicing any roll grooving tools, read all instructions in this ...

Hazard Identification . . . . . . . . . . . . . . . . . 4 Operator Safety Instructions . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . 6 Power Requirements . . . . . . . . . . . . . . . . . . 7 Tool Nomenclature . . . . . . . . . . . . . . . . . . . 8 Tool Dime ...

­levels are ­provided below. This safety alert symbol indicates important safety messages. When you see this symbol, be alert to the possibility of personal injury. Carefully read and fully understand the message that follows. DANGER • The use of the word “DANGER” ­identifies an ...

­electrical source before servicing the tool. Only authorized personnel should perform maintenance on the tool. Always disconnect the power cord from the electrical source before servicing or ­adjusting the tool. 3. Prevent accidental startups. Place the power switch in the “OFF” position before connecting the ...

may be exaggerated for clarity. • The tool, along with this operating and maintenance instructions manual, contains trademarks, copyrights, and/or patented features that are the exclusive property of Victaulic. The Victaulic VE268/269 Roll Grooving Tool is a fully motorized, semi-automatic, ...

ELECTRICIANS SHOULD CONNECT INCOMING POWER TO THE TOOL. • To reduce the risk of electric shock, check the electrical source for proper grounding. • Always turn off the main power supply to the tool before making any tool adjustments or before performing any maintenance. • DO NOT alter the plug in any wa ...

• The tool, along with this operating and maintenance instructions manual, contains ­trademarks, copyrights, and/or patented features that are the exclusive property of Victaulic. Hydraulic Cylinder Pipe Size Indicator Depth Adjuster Depth Adjuster Lock ...

Mounting Holes 24.00 in/ 610 mm 22.75 in/705 mm Mounting Holes 30.75 in/ 781 mm TOOL DIMENSIONS AND SPECIFICATIONS Tool weight is 735 pounds/333.4 kilograms. Tool sound pressure is below 70 dB(A). TM-VE268/269_9 REV_F TM-VE268/269 / Operati ...

to the tool until instructed otherwise. • The tool MUST be leveled and anchored securely on a concrete floor or base. Failure to follow these instructions could result in serious personal injury. 1. Remove all components from the packaging. Verify that all necessary items are included. Refer to ...