Venjakob Trema Assembly Instruction
Text of the manual
1. Bringen Sie die Regalbodenträger (mit der geschlossenen Seite
nach oben) waagerecht an der Wand an.
Bitte beachten Sie dabei den Abstand der Regalbodenträger von mitte
Aufnahmestift zu mitte Aufnahmestift!
(siehe Skizze)
2. Korrigieren Sie die Neigung des Regalbodenträgers mit Hilfe der beiden
Stellschrauben neben dem Aufnahmenstift etwas nach oben.
3.
1. Screw the shelf bearings horizontaly onto the wall (with the closed side up)
Please note the distance between the shelf bearings from middle of shelf bearing
to middle of shelf bearing! (see drawing)
2. Adjust the tilt silightly upwards by use of the adjusting screw next to the pin.
3. Push the shelf carefully onto the pin.
IMPORTANT: The provided fitting