Venjakob 655 Series Assembly Instructions

Text of the manual

Aufbauanleitung / assembly instructions mod.

6550 - 6553 & 6560 - 6563 mit Mittenauszug 1. Montagematerial 1. fitting material 2. Zwei Füsse auf gepolsterten Montageböcken ablegen. 2. Lay two table legs onto padded assembling trestles. 3. Die Bohrungen des Halteblechs über den Markierungen positionieren. 3. Place the metal plate onto the holes of the wood

5. Die Plattenträgerwanne auspacken und

umgedreht auf den gepolsterten Montage- böcken ablegen. 5. Put the metal tray onto the padded assembling trestles. 6. Das erste Fuss-Paar mit den Bolzen in die Plattenträgerwanne einstecken. 6. Stick the bolts of the first pair of table legs into the holes of the metal tray. 7. Mit je einer Unterlegscheibe und einer

9. Den vormontierten Unterbau wenden ...

9. Turn the pre-assembled base ... 10. ... und am Bestimmungsort aufstellen. Zur Verhinderung von Kratzern beim nach- folgenden Aufsetzen des Oberbaus sollten z.B. Pappstreifen auf die Plattenträgerwanne gelegt werden. 10. ...and put it to the place of final destination. To avoid scratches when putting the table-top

13. Vor dem Ausziehen des Tisches müssen die

beiden schwarzen Bremshebel auf beiden Seiten gelöst werden. 13. The black brake handles must be released at both sides before the pullout can be taken out. 14. Fertig. 14. Ready. 6550 - 6553 & 6560 - 6563 mit Mittenauszug 4 / 4 Änderungsdatum: 05.02.16 !

Other Indoor Furnishing Manuals