Venjakob 6133 Assembly Instructions
Text of the manual
Modelle: 6133, 6134
Abb.1
Montageteile:
1
1x vormontierter Unterbau
2
4x Nagelgleiter (in Sockelplatte eingeschlagen)
3
2x Höhenversteller (in Sockelplatte eingeschraubt)
4
1x Trägerplatte mit Bohrungen zur Befestigung des Oberbaus an den Unterbau
5
2x Schienen mit vormontierten Einlagen
6
4x Gewindestifte, Unterlegscheiben und Muttern im
Auf einer Seite des Schienenpaares beide inliegenden Feststellschrauben lösen und einen
Auszug ca. 5-10cm herausziehen (siehe Abb. 2). Danach pro Schiene je zwei Gewindestifte
(6) gemäß Abb.2 in die Schiene einschieben. Den Auszug wieder einschieben und die
Feststellschrauben einschrauben.
f)
Die vormontierte Einheit aus Schienen und Einlagen (5) mit z
Assembly instructions 09.01.2017
models: 6133, 6134
fig.1
Parts:
1
1x pre-assembled frame
2
4x feet (fitted to the base plate)
3
2x adjusting feet (screwed into the base plate)
4
1x bearing plate with pre-drilled holes to fit the table top to the table base
5
1x rails with assembled extensions
6
4x threaded bo
Loosen both inner fixing-screws on one side of the rail-pair and extend the table approx. 5-10
cm (see fig. 2). Then put two threaded bolts (6) per rail according to fig. 2 into the rail. Push
the extension back in and fix the fixing screws.
f)
Turn the rails with assembled extensions (5) with 2 people and hold it with some distance
approx. in the centre