Velleman VWS2E Manual 

VELLEMAN VWS2E – 2-CHANNEL VIDEO WEB SERVER 1. Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised company for recycling. This device should be returned to y ...

VELLEMAN o POS (Point of Sale) and live promotion o medical emergency sites and hospitals o banks o traffic control management o nursery and retirement homes o parking lots o production facilities such as factories • software and manual included on CD • good knowledge of network and internet applications required 4. Technical Specifications • channels: 2 channels for analogue & digital devices • video input: 1.0Vpp, 75 ohms, composite, ...

VELLEMAN 6. Connection and Installation 1. Connecting your VWS2E to a DVR 1. DVR baud rate and ID setting: Set the baud rate and ID of the DVR. Make sure that the baud rate and ID are identical to the settings of your VWS2E. 2. DVR and video web server pin connections: Connect the pins of the DVR to the pins of the VWS2E. For detailed pin connection, refer to “Appendix 1” and “Appendix 2”. • PIN 1, 6: RS485-A, RS485-B Use the RS485-A ...

VELLEMAN Before changing the properties, write down the original network settings so you can recover them afterwards. Click on “Use the following IP address”, set the IP address and subnet mask. The IP address should be 192.168.1.XXX, with XXX from 1 to 256 except 10 (192.168.1.XXX is the video web server default IP). The subnet mask must always be set on 255.255.255.0. 2. After the IP setting, connect the VWS2E to a PC or notebook with a c ...

VELLEMAN Dynamic IP NOTE: For a dynamic IP (PPoE, DHCP), apply the host name first. Refer to “Appendix 4 – DDNS Application”. 8. Disconnect the PC from the VWS2E and connect the VWS2E to the internet via the RJ45 plug. 4. Internet Connection Change the PC network setting to the original setting and connect the PC to the internet. Click the “Video Server E” icon twice and enter the user name, password, static IP and port. Click the gre ...

VELLEMAN Address Book: Add frequently used IP addresses or choose any preset IP address. Copy: Copy all the software installation files so you can keep all the settings for the next software installation on another PC. Search: Search the available IP addresses of the external device in the local area. Modify the network settings of the external device. Upgrade Firmware: Get the provided firmware and press the “Upgrade” button. Player: Acces ...

VELLEMAN q. Max Zoom In r. Max Zoom Out s. Menu / Up / Down / Left / Right t. Enter u. Turbo: To speed up the menu selection or the control of the PTZ camera under video web server, you can activate "Turbo" function by clicking this button. You can change the turbo steps from 1 to 10. Example: If you activate the TURBO function, set the value of the turbo step as 3, when you press one of the button up/down/left/right, one mouse click will fun ...

VELLEMAN E. Snapshot: Press this button to take a snapshot of the current image which will be saved in the designated destination. F. Close the Player. NOTE: • When pausing the playback picture, press “ ” button to go to the previous frame or press “ ” button to go to the next frame. • In the playback mode of the software AP, press ” “ button to check the authenticity of the BACKUP VIDEO. If the BACKUP VIDEO has been altered, th ...

VELLEMAN 4. Web Port: The DVR can be viewed over the network with software AP or a web browser. Typically, the TCP port used by HTTP is 80. However in some cases it is better to change this port number for added flexibility or security. Valid number is 80 ~ 19999. DDNS Press the “ ” button to enter the system setting page. 1. DDNS is a service for transforming dynamic IP to a specific “Hostname”. 2. DDNS Apply: Go to a website providing ...

VELLEMAN MAIL Press the “ ” button to enter the system setting page. 1. When alarm or motion alarm is triggered, a video copy file can be captured. The DVR can send an email notification to the assigned recipients (up to 5 recipients). NOTE: To activate the email notification function, enable the function of the email notification in the Alarm setting first (see “Alarm” below). 2. Add the recipients’ email accounts in the Mail Accoun ...

VELLEMAN ALARM Press the “ ” button to enter the system setting page. 1. Alarm Trigger: Enable or disable the email and FTP notification function. 2. Alarm Method: Two notification methods: email and / or FTP. 3. Post Number: Set the MJPEG pictures (1-10 pictures). 4. Alarm Duration: Set the duration time of the motion trigger recording (3 sec, 15 sec, 30 sec, 1 min or 30 min). 5. Alarm Refresh: Clean the alarm message “ ”shown on the ...

VELLEMAN ACCOUNT 1. Set up the user’s account (max 5 accounts), password, life time and authority level (max 5 users on line at the same time). 2. User’s level: SUPERVISOR — Control all the functions (“a”, “b”, “c”, “d”, “e” and “f” ). HIGH — Control only “a”, “b”, “c”, “d” and “e” functions but cannot control “f” function. NORMAL — Control only “a”, “d”, and “e” functions b ...

VELLEMAN FILE PATH 1. Snapshot Path: Assign the route for saving the snapshot picture. 2. Record Path: Assign the route for saving the manual recording file. 3. Alarm Audio Path: The default alarm audio sound is “alarm.wav”. You can have your own alarm sound file by entering the file path. 9. Appendix #1 – DVR Control Connect the SUB-D plug of the VWS2E with the DVR. 1-channel or 4-channel DVR 4-channel, 9-channel or 16-channel DMR ...

VELLEMAN Enable the remote mode on the DVR (remote mode: RS485; baud rate: selectable; ID: same as “Peripheral” above). 1-channel or 4-channel DVR → 4-channel, 9-channel or 16-channel DMR → Set up the peripheral control in the system configuration of the VWS2E. 10. Appendix #2 – PTZ Control Connect the SUB-D plug of the VWS2E with PTZ camera. (MENU) TIMER CAMERA RECORD ALARM DWELL ► REMOTE SYSTEM EVENT (REMOTE) ► REMOTE MODE: RS4 ...

VELLEMAN Set up the peripheral control in the system configuration of the VWS2E. NOTE: Set the ID as the PTZ ID value. The default value is 0. 11. Appendix #3 – IE Browser You can get access to the VWS2E via the web page. Type the IP address of the video web server in the URL address box and press ENTER. The following screen will appear. Type your user name and password and press SUBMIT to log in. 12. Appendix #4 – DDNS Application • Go ...

VELLEMAN Click on CREATE ACCOUNT to see the following page. Register the information and click on CREATE ACCOUNT. After having created an account, you will receive a confirmation email within a few minutes. To complete your registration, follow the directions you will receive. Complete these steps within 48 hours. If you do not receive the confirmation email within the hour, request a password reset (http://dyndns.org/account/resetpass). Enter ...

VELLEMAN • Create a host name: Login → “Account” → “My Service” → “Add Host Services” → “Add Dynamic DNS Host” → Enter and choose the host name → Click on “Add Host” → DDNS host name created. The DDNS host name has been created. VELLEMAN cannot be held responsible in the event of damage to or loss of programmes, data or removable media. VELLEMAN advises you to regularly make backups onto different storage me ...