Velleman VM119 Manual 

Text of the manual

ONE CHANNEL DUAL OUTPUT RECEIVER

One channel dual output receiver 3 1-kanaals ontvanger met dubbele uitgang 8 Récepteur monocanal à double sortie 13 1-Kanal-Empfänger mit doppeltem Ausgang 18 Receptor monocanal de doble salida 23 for use with our VM118R transmitter

-1- Receiver module

-2- LED 2 : output "1" indicator -3- LED 1 : Status indicator -4- LED 3 : output "2" indicator -5- LED 4 : Status indicator -6- Power supply -7- Setup button -8- output "1" -9- output "2" Description -1- Ontvangst module -2- LED 2 : uitgang "1" indicatie -3- LED 1 : statusindicatie -4- LED 3 : uitgang "2" indicatie -5- L

This product is guaranteed against defects in components and construction from the moment it is purchased and for a period of TWO YEAR starting from the date of sale. This

guarantee is only valid if the unit is submitted together with the original purchase invoice. VELLEMAN components Ltd limits its responsibility to the reparation of defects or,

Specifications & features

SPECIFICATIONS & FEATURES For use with our "VM118R" transmitter Using multiple receivers of this type in combination with our 8 channel transmitter, will allow you to control remotely up to 8 devices at different places. e.g. Perfectly suited for hide –away control situations, for demonstrations, home use... A single transmitter

CONFIGURING K8058 / VM118R AS 'PULSE'

At power-on, LD1 will flash a # of times, hereby indicating that the unit is operational. Next, LD4 will turn-on. At first power-on, the unit will respond to channel(1)/button(1) of the K8058/VM118R transmitter. Make sure the transmitter buttons are configured as 'pulse'. TO LEARN A REMOTE (BUTTON): * ATT

1. Turn off the power.

2. Hold 'setup'-button. 3. Turn on power. LD1 and LD4 will start flashing 4. Release 'setup' when LD1 and LD4 stop flashing * This process takes about 10 seconds. * If the button is released before the leds stop flashing, the memory will not be cleared. * The unit will now respond to the default code only. TO REMOVE ALL STORED REMOTE

Pressing a transmitter button will operate both outputs simultaniously.

Each relay will behave according to the selected mode. In '0.5s timer'-mode, the relay will remain on for as long as the remote button is held. In 'ON/OFF'-mode, the relay will toggle between ON and OFF every time the remote button is pushed. 1. Push 'setup'-button repeatedly t

Dit produkt is gewaarborgd wat betreft gebreken in materialen en vakmanschap op het ogenblik van de aankoop en dit gedurende een periode van TWEE JAAR vanaf de

aankoop. De waarborg geldt enkel indien het produkt voorgelegd wordt samen met het origineel aankoop bewijs. De verplichtingen van VELLEMAN COMPONENTS N.V. beperken zich tot het herstellen

Other Receiver Manuals