Vector VX1000 Product Information

1 Overview ......................................................................................................................................................................................... 3 1.1 Introduction ..................................................................................................................... ...

the vehicle, both in the interior and in the engine compartment, on test benches and in the laboratory. Especially when developing ADAS ECUs, this allows you to handle raw data captured by high-resol ...

> Calibration memory page switching > Automatic overlays when calibrating parameters in flash memory > Stimulation or bypassing with short latency times > 100/1000 Mbit/s Ethernet connection to the PC > Galvanically isolated power supply with wide input voltage range > POD power suppl ...

Serial target interfaces are controller access points or debug interfaces at which the measurement data is acquired by means of DMA read/write accesses to the controller memory. A VX154x Serial POD is used to connect the VX1000 Base Module to targets with serial target interfaces. This POD is characteri ...

Texas Instruments > TMS570 via RTP/DMM 3 Software Drivers for ECUs For most applications, the VX1000 system requires a driver in the ECU application. This VX1000 Application Driver can be flexibly configured and offers many other selectable functions in addition to DAQ measurement data acquisition: > Automatic detec ...

4.1.1.1 Component Overview Base Module and accessories Base Module VX1060 Serial Base Module Power supply Laboratory cable Plug-in adapter Vehicle plug Laboratory plug with 3-pin binder connector Vector wall power supply with 3-pin binder connector Vehicle plug with 3-pin binder conne ...

4.1.2.1 Component Overview Base Modules and accessories Base Modules VX1132 Base Module with interface option B/C/H/S CAN accessories VX1361C CAN Cable Lemo/D-Sub VX1361D CAN Cable Lemo/D-Sub VX1362A CAN Cable Lemo 1.5 m VX1362B CAN Cable Lemo/banana plugs 1.5 m VX1365A CAN Cable Lemo 5.0 m CAN Cable Lemo plug with D-S ...

Compared to the VX1132, the VX1135 Base Module offers a higher XCP data rate of up to 100 MB/s. It is also available in four variants with different POD connectors. All the available variants possess a target BroadR-Reach/Ethernet socket as well as five CAN channels and optionally a fully-featured FlexRay channel. Unlike at ...

Despite their very compact design, the VX154x Serial PODs offer high-performance ECU connections using only a few pins. Figure 6: VX1543A Serial POD 4.2.1.1 Performance Characteristics Serial PODs Target Controller xPC5xxx, V850, XC2000 TriCore Production Device (PD) TriCore Emulation Device (ED) Data Trace Measur ...