Vello shutterboss version ii Operation & User’s Manual

timer functionality and control for shooting self-timed photos, long exposures, or for use as an intervalometer. This makes it easy to program in specific delayed shutter-release times, lengthy exposure times, or timed intervals between a sequence of shots. Capture group photos with yourself in the picture, start ...

unauthorized modifications. Use only with compatible devices specified in this manual. • Keep this device away from water or extreme humidity, and store it in a dry and cool place. • Do not operate in conditions with extreme heat or cold. • Do not operate in the presence of flammable gases or vapors. • ...

Shutter Release Button Hold switch Battery compartment cover Control Selection Button Set Button *Includes two AAA batteries Backlight/Lock Button Eyelet For Strap Or Lanyard Connector Cable ...

Audible Beep Function Time Display Audible Beep Indicator Number of Shots Indicator RELEASE Indicator SET Indicator TIMER/ACTIVE Indicator LOCK Indicator Low battery Indicator Function Cursor Self-Timer Function Exposure Function Interval Function TIMER ACTIVE SET RELEASE SELF LONG INTV No. BEEP DISPLAY PANEL ...

compartment cover. 2: Insert the two included AAA batteries as shown, following the diagrams inside the battery compartment. The ShutterBoss’s LCD will turn on. The low-battery indicator will blink when the battery power is low. Remove the batteries, and change with similar type AAA batteries. INSERTING THE BATTERIES POW ...

models that are compatible with many different cameras. The only difference in the ShutterBoss models is the connector on the end of the cable. Your ShutterBoss and camera may look different from those pictured in this guide. 1: Turn off your camera and the ShutterBoss. 2: Connect the ShutterBoss’s cable to your cam ...

backlight. It will remain lit for about 6 seconds. Lock Button The LOCK button locks all controls except the remote’s shutter release button. Press and hold the LOCK button for about 3 seconds, until the icon appears on the LCD. To unlock, press and hold the LOCK button for about 3 seconds, unti ...

adjust timer functions and settings. Press SET once to engage settings. Information displayed on the LCD will begin to blink. Press SET again to confirm settings. Directional Pad Use the / arrows to select different timer functions and time positions (hours, minutes, and seconds). The cursor will indicat ...

is as a manual release. You can trigger your camera by pressing the remote’s shutter release button. This works even with the remote’s power turned off. 1. Adjust your camera settings, such as exposure mode, shutter speed, and focus and shooting modes. 2. Press the remote’s shutter release button halfway t ...