Vacon 100 Applications Manual

INDEX Document: DPD00927D Version release date: 5.5.12 Corresponds to software package FW0072V003.vcx 1. Vacon 100 - Startup ......................................................................................... 2 1.1 Startup Wizard.................................................. ...

Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205 3.4.18 Group 3.5: I/O Configuration ........................................................................................... 77 3.4.19 Group 3.6: Fieldbus Data Mapping.................................................................................. 88 3.4.20 Group 3.7: Prohibit Frequencies... ...

vacon • 2 24-hour support +358 (0)201 212 575 • Email: [email protected] 1 1. VACON 100 - STARTUP NOTE! This manual includes a large amount of parameter tables. Below you can find the col- umn names and their explanations: 1.1 Startup Wizard In the Startup Wizard, you will be prompted for essential information needed by the drive so tha ...

Vacon 100 - Startup Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205 Push the OK button unless you want to set all parameter values manually. Now the Startup Wizard is done. The Startup Wizard can be re-initiated by activating the parameter Restore factory defaults (par. P6.5.1) in the Parameter backup submenu (M6.5) OR choosing Activate for ...

vacon • 4 24-hour support +358 (0)201 212 575 • Email: [email protected] 1 1.2 I/O Configuration Wizard I/O configuration wizard is activated in the Quick Setup / Wizards menu (B1.1.1). This wizard is intended for the easy configuration of the drives standard I/O by selecting one of the preset I/O configurations. Note! If you already ha ...

Vacon 100 - Startup Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205 1.2.1 Standard I/O Configuration *) Digital inputs can be isolated from the ground with a DIP switch, see figure below RUN FAULT READY Reference output +10 Vref 1 24V auxiliary voltage 24Vout 6 Analogue input, voltage or current Reference potentiometer 1...10kΩ Reference (4 ...

vacon • 6 24-hour support +358 (0)201 212 575 • Email: [email protected] 1 1.2.2 Local-Remote I/O Configuration *) Digital inputs can be isolated from the ground with a DIP switch, see figure below RUN FAULT READY Reference output +10 Vref 1 24V auxiliary voltage 24Vout 6 Analogue input, voltage or current Reference potentiometer 1...10 ...

Vacon 100 - Startup Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205 1.2.3 PID Control I/O Configuration *) Digital inputs can be isolated from the ground with a DIP switch, see figure below RUN FAULT READY Reference output +10 Vref 1 24V auxiliary voltage 24Vout 6 Analogue input, voltage or current Reference potentiometer 1...10kΩ Actual va ...