UniFi G3 Quick Start Manual

Text of the manual

Before You Begin

The G3 Battery camera is designed to work with Ubiquiti’s new integrated management system, UniFi Protect. UniFi Protect is a flexible and powerful IP video surveillance system that can manage UniFi Protect cameras and the UniFi Protect mobile app. The software is free from all hosting and licensing fees and comes pre-installed on UniFi’

LED  The LED will flash blue during bootup. When the camera

is ready to connect to the Wi-Fi network, the LED pattern will flash two times accompanied by two beep tones. Once connected to the network, the LED will glow with a steady breathing pattern. State Status Alternating White/Blue Device is busy; do not touch or unplug it.

The G3 Battery camera can be installed using one of the

following methods: • Desktop For installing on a flat surface such as a desktop or table/shelf; could be set up for temporary installations. • Wall/Ceiling For installing in a secure location; used more for stationary or permanent installations. • Pole For installing on a pole. Note:

1. Use the Screws and Screw Anchors to secure the

Wall Mount to the wall. 2. Attach the G3 Battery to the magnetic Bridge Mount. 3. Attach the G3 Battery to the magnetic Wall Mount.

Other IP Camera Manuals