Tumbl Trak Quick Flex Bar Assembly Instructions
Text of Tumbl Trak Quick Flex Bar Assembly Instructions
Thank you for purchasing
the Quick Flex Bar to be
used with the original Tumbl
Trak™. This product is not
designed to be used with
other tumbling tracks or
trampolines. We hope you
will enjoy years of use of
this product.
After opening the boxes,
please check the parts list to
make sure all pieces have
arrived in good condition. If
you have any questions
during this assembly
process, pleas
Locate the leg of your Tumbl Trak on which you want
to place the Quick Flex Bar bracket. Remove the PTO
pin of Bracket #1 and open the hinged portion of the
bracket.
Slide Bracket #1 into position,
placing it tightly against the leg.
Close the hinge and replace the
PTO pin into the hole on the
“U” (hook) part of the bracket.
Tighten the ratchet as tight as you can. You will
then want to bounce on the strap a few times and
tighten again. Make sure to lo