TROLL nursery SCANDY COTBED Quick Start Manual
Text of TROLL nursery SCANDY COTBED Quick Start Manual
RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
The illustrations in these instructions are to be used as a guide only
Made in Latvia
Conforms to:
BS EN 716-1:2008 + A1:2013 Incorporating corrigendum June 2013 & BS EN 716-2:2008+A1:2013
BS 8509:2008 + A1:2011
AS/NZS 2172:2013 & TPA 1974 - consumer protection notice No. 6 of 2005
Danish by Design,
PO Box 1543 Black Rock VIC 3193.
www.danishbydesign.com.au
SAFETY INSTRUCTIONS
* Your child’s safety is your responsibility.
* The cotbed is designed to be dismantled for storage or transport.
* Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent person.
* Follow ass
ASSEMBLING - COT
Choose lower or upper
mattress base height
position using fittings D.
Do not tighten
screws
1
1
2
2
2
2
3
6
6
7
7
7
7
ASSEMBLING - COT
WARNING!
op
surface must not be higher
than this mark!
The t
ofthe mattress
Drop mattress base onto screw
in dowel pins. Tighten the cams
on front underside of mattress
base using a crosshead
screwdriver.
Close free holes
using fittings H.
Securely tighten all screws.
1
1
2
2
3
4
Do not tighten
screws
ASSEMBLING - BED
Close free holes
using fittings H.
4
4
5
5
5
5
2
2
2
2
2
2
Securely tighten all screws.
Do not tighten
screws
Do not tighten
screws