Triplett LD70 Operation & User’s Manual

LD70 User Manual Triplett Test Equipment & Tools 850 Perimeter Rd. Manchester, NH 03103 ...

Volume, and Indirect readings using the Pythagorean Theorem (a2+b2=c2). It also includes a laser pointer, tripod mount and 20 point historical data group function. Please visit www.triplett.com for the latest version of this User Guide, Produc ...

(Pythagorean Theorem) Indirect measurement Setting-out measurement Area/volume measurement Length measurement Battery level indication Stored data indication Angle indication Signal strength Indication Auxiliary display area Main display area 1. Pow ...

1. Install/replace the battery ◆Open the battery cover. ◆Install two battery AAA batteries provided by the manufacturer; it is suggested to use alkaline battery in the future); pay attention to the polarity and don’t install reversely. ◆Put the battery cover in place 2. Power on Hold dow ...

In the length measurement mode, press 【 】 key to open the laser. After the laser aims at the object, press【 】 key to carry out measure- ment. The measurement result is displayed at main display area. The auxiliary display area displays the distanced measured last time. 2. Continuous measure ...

For measurement of distance, area and volume, accumulation/subtraction operation may be conducted through operation of addition and subtraction. Press [ ] key to carry out additive operation and press [ ] key to carry out subtraction. Accumulation/ subtraction of distance: At t ...

and common right-angle edge c of a triangle to calculate the length of edge d of the triangle. In the length measurement mode, press [ ] key three times and the screen displays . The edge to be measured flashes to prompt. Press 【 】key to complete ...

Laser grade Grade Ⅱ Laser parameters 620-670nm，＜1mW Continuous measurement Addition/subtraction measurement: Area/volume measurement Measurement with Pythagorean Theorem Maximum/minimum value measurement Angle measur ...