Triax CSE 816 Assembly Instruction Manual

CSE 816 Contents 1 Notes about safety and hazards...................................................................4 2 General information.....................................................................................6 2.1 Meaning of the symbols used...........................................................6 2.2 Scope of delivery............... ...

CSE 816 9 The control panel at a glance......................................................................22 9.1 Control panel...............................................................................22 9.2 Menu items..................................................................................22 10 Updating the software of the control unit ...

CSE 816 1 Notes about safety and hazards • Observe the relevant VDE regulations. • If the power cord needs to be replaced, only use an OEM power cord (EMC). • The standards EN/DIN EN 50083 resp. IEC/EN/DIN EN 60728 must be observed, especially concerning equipotential bonding and earthing. • Observe the relevant standards, regulations ...

CSE 816 • Do not place any vessels containing liquids on the head-end station. • Do not place anything on the head-end station which could initiate fires (e.g. candles). • Due to the risk of fires caused by lightning strikes, we recommend that all mechanical parts (e.g. distributor, equipotential bonding rail, etc.) be mounted on a non-combustibl ...

CSE 816 2 General information 2.1 Meaning of the symbols used Important note • Performing works Danger by electrical shock —> General note 2.2 Scope of delivery 1 CSE 816 head-end station (without cassettes) 1 CD (assembly instructions) 1 Brief assembly instructions 1 Ferrite sleeve 1 Power cord + strain relief 2.3 Available accessories For cassett ...

CSE 816 2.4 Technical data The devices meet the following EU directives: 2011/65/EU, 2014/30/EU, 2014/35/EU The product fulfils the guidelines and standards for CE labelling. Unless otherwise noted all values are specified as "typical". General Cassette slots: ......................................................................................8 Admis ...

CSE 816 Decoupling loss of the inputs:...........................................................30 dB Gain:............................................................................................13 dB Output level with 16 channels......................................maximum 100 dBµV Power supply PS 190 Mains voltage:............................. ...

CSE 816 the control unit to program the master output level of the head-end station. The software version of the control unit appears on the two-line LC display after switching on the head-end station. If the inner temperature of the head-end station exceeds the permissible tem perature of 65 °C when operating, a message appears in the display instead ...

CSE 816 3.2 Connectors and components Front view / side view (type label) 2 2 ! 4 2 2 3 5 7 K Fig. 2 2 Mounting screws 3 Cassette slots 1 … 8 4 Outputs of the SAT IF input distributors 5 Cover with openings for cable terminals —> To maintain compliance with the EMC regulations, the head-end sta tion must not be operated without this cover. —> Th ...