Toto Washlet E200 Instruction Manual

Morrow, GA 30260 (770) 282 8686 For your safety, be sure to inspect your Washlet E200 occasionally. ●Is the power plug abnormally hot? ●Is the power plug covered with dust? ●Is the outlet loose? ●Is your Washlet operating differently than usual? * In case anything is abnormal, contact TOTO USA to prevent a fire or an electrical s ...

Be sure to read the following safety instructions and use the product only as described in this manual. Please follow basic safety instructions to ensure the safe use of your product. READ ALL INSTRUCTIONS BEFORE USING The following symbols are used to indicate important safety instructions for the use of the product. The ...

not use the following to clean the Washlet. Toilet bowl cleaner, household cleaner, benzene, paint thinner, powdered cleanser, or nylon scrubbing pads. ●Use of any cleaning product other than diluted dish detergent may crack the plastic and cause injury to the user or m ...

risk of electric shock by providing an escape wire for the electrical current. This product is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and ...

Protect the environment and reduce the use of water and electricity. Keeping the lid closed will help maintain the warmth of the toilet seat. The timer is set to conserve energy. Shut off for 3 hours to conserve energy. Set the timer so that it shuts off the toilet seat and water heater each day at the same time to save energy. ...

Water drainage plug Main Unit detach button (See page 23) Lid Antibacterial Label Toilet seat sensor (See page 33) Main Unit Electrical plug Heated toilet seat (See page 16) Antibacterial Wand (Wand head ) (See page 27) Antibacterial Junction valve (equipped with water filter) Connection ...

battery lid close open back side batteries, 2 AA Remote Control Display Preparation Insert batteries into the remote controller. ➀Remove the remote controller from its wall hanger. ● Grasp the remote controller at each side and pull straight up. ➁Open the battery lid on the back of the remote controller. ➂Insert 2 AA ba ...

Wash 1 1 Be sure to sit deep into the back of the toilet when sitting on the toilet seat. This will ensure the best wash position and prevent water from splashing. Sit The toilet seat sensor is activated and all of the functions are ready for use. Standard use Comfort wash 1 Warm water is sprayed. 2 Adjust the water pressure. ● ...

toilet seat by pushing the and buttons. There are 5 settings. To turn off the temperature display, push down on the button until the display goes out. ● The dryer temperature can be adjusted to 5 different settings by pushing the button. The dryer heater is not activated unle ...

by pressing the Timer ON/OFF button again. 1 Select the time that you want the timer to turn on and press the Timer ON/OFF button on the Remote Controller. Display ●"Energy-Saving Timer" and "Energy-Saving Time" are displayed on the ...