Toa H-2 Operating Instructions Manual
Text of Toa H-2 Operating Instructions Manual
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
TOA Corporation
2
3
3
3
4
5
8
9
9
10
10
11
11
11
12
12
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS
2. GENERAL DESCRIPTION
3. FEATURES
4. HANDLING PRECAU
1. SAFETY PRECAUTIONS
• Be sure to read the instructions in this section carefully before use.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Me
2. GENERAL DESCRIPTION
TOA's H-2 and H-2WP are small, dome-shaped 2-way speakers featuring high sound quality. The H-2 is
designed for indoor use, and the H-2WP is designed for outdoor use.
Note: Protect the H-2WP from rain when installing. (Refer to P. 10 "7.1. Waterproofing".)
3. FEATURES
• The speaker's smooth curved surface allows it to blend in with t
Front grille (grille frame)
Front grille (Grille)
[Side Panel]
Anti-slip piece
Accessory (Base frame)
[Rear Panel]
Aiming marker
Lock tab
[Installation Example]
4
Detachable input connector
Connector for impedance selection
(For mounting to
an electrical box)
6.1. Direct Wall/Ceiling Mounting
Step 1. Base frame mounting
1-1. Pull the cables out of the wall or ceiling through the
hole in the center of the base frame, then strip the
insulation back about 5mm from the cable ends.
Tip
• Usable cable: Solid cable or stranded cable (0.2
mm
2 - 2.5 mm
2) (Corresponding to
AWG No. 24-14)
• The base fr