Thrustmaster TMX Force Feedback Manual
Text of the manual
ENGLISH- BOOTLOADER METHOD: how to wake your racing wheel if it is
no longer recognized on Xbox One or PC
(i.e. in the event of firmware loss)
FRANÇAIS- METHODE BOOTLOADER : Procédure pour réveiller votre
volant s’il n’est plus du tout reconnu sous Xbox One ou sur PC
(en cas de perte de firmware)
DEUTSCH- BOOTLOADER-METHODE: Wie reaktivieren Sie Ihren
Rennlenker falls dieser nicht mehr auf der Xbox One oder dem PC
erkannt wird (i.e. im Falle eines Firmwareausfalls)
NEDERLANDS- BOOTLOADER-METHODE: hoe het racestuur weer tot
leven te wekken als het niet meer wordt herkend op een Xbox One of pc
(d.w.z. de firmware werkt niet meer)
ITALIANO- METODO BOOTLOADER: come riattivare il tuo volante qualora
non venisse più riconosciuto dalla Xbox One o dal PC
(ovvero nel caso di perdita del firmware)
ESPAÑOL- METODO BOOTLOADER: procedimiento para despertar a tu
volante de carreras si ya no lo reconocen ni la Xbox One ni el PC
(p.ej. en caso de pérdida de firmware)
PORTUGUÊS- METODO BOOTLOADER: como reactivar o volante se este
deixar de ser reconhecido na Xbox One ou no PC
(isto é, na eventualidade de perda do firmware)
РУССКИЙ- Использование загрузчика: как активизировать рулевую
систему, если она перестала распознаваться на Xbox One или ПК
(т. е., в случае сбоя прошивки)
ΕΛΛΗΝΙΚΑ- Μέθοδος φόρτωσης εκκίνησης: πώς να ζωντανέψετε την
τιμονιέρα σας, εάν δεν την αναγνωρίζει πλέον το Xbox One ή το PC
(δηλ. σε περίπτωση απώλειας υλικολογισμικού)
TÜRKÇE- BOOTLOADER YONTEMI: yarış direksiyonunuz Xbox One veya
bilgisayar tarafından algılanmadığında (yani, aygıt yazılımı hatası
durumunda) direksiyonun nasıl uyandırılacağı
日本語 - ブートローダーによる復旧方法: ステアリングホイールが Xbox One または PC によって
認識されなくなった場合 (ファームウェア不具合時)
BOOTLOADER METHOD: how to wake your racing wheel if it is no longer
recognized on Xbox One or PC
(i.e. in the event of firmware loss)
Required system: PC running Windows® 8 or 10.
1) Install the drivers
“PC - DRIVERS FORCE FEEDBACK”:
https://support.thrustmaster.com/en/product/tmxforcefeedback-en/
During the installation:
- DO NOT CONNECT the racing wheel to the PC before being requested to do so.
- Connect the racing wheel directly to the PC’s USB port. We advise against using a
USB hub during this procedure.
- DO NOT CLICK on any windows that may appear during the update.
2) Restart the computer.
3) After restarting the computer:
- Remove the USB plug from the computer.
- Simultaneously press buttons MODE and XBOX Guide (located on the racing wheel’s
base), then connect (without releasing MODE + XBOX GUIDE) the USB plug to the PC.
- The following message appears in the lower right-hand corner of your screen (do not do
anything or click on any window during the automatic installation procedure).
- After the installation, a second message appears:
Your racing wheel’s bulk drivers are now installed.
Thrustmaster TMX Bulk Driver
- During the installation, the racing wheel does not run the auto-calibration procedure
(i.e. the racing wheel does not automatically move to the left and right) when connected to
the PC: this is normal.
- The racing wheel’s MODE LED is off: this is normal.
- The racing wheel is not detected in the Control Panel: this is normal.
- The racing wheel is detected in the Device Manager, in the Sound, video and game
controllers section, under the name Thrustmaster TMX Racing Wheel Bulk Driver:
this is normal.
4) Select Start > All Programs > Thrustmaster > FFB Racing Wheel,
then click Firmware Update.
Thrustmaster TMX Racing Wheel Bulk Driver
