Thrax Audio Yatrus Operating Manual

by Thrax Audio Operating Manual Manual issued 05/05/2020 CAUTION THE UNIT CONTAINS NO USER SERVICEABLE PARTS. DO NOT REMOVE THE COVERS. LETHAL VOLTAGES ARE PRESENT WITHIN THE CHASSIS. DO NOT OPERATE THE UNIT IF WET OR NEAR WATER. THE TURNTABLE IS FAIRLY HEAVY. BE SURE TO USE PROPER LIFTING TECHNIQUES TO AVOID BACK STRAIN AND INJURY. BE CERTAIN TO INSTALL IT IN A SECURE LOCATION FROM WHICH IT CANNOT FALL OR TIP OVER. TIME SPENT FAMILIARIZING YOURSELF WITH THIS MANUAL WILL BE WELL REWARDED. ...

2. Introduction ………........................................................................................… 4 3. Specifications ……........................................................................................… 4 4. Unpacking and Installation - Unpacking ……....................................................................................… 5 - Installation ……....................................................................................… 6 5. Operation ……….............................................. ...

equipment should be read before power is applied to the equipment. RETAIN OWNER'S MANUAL: These safety and operating instructions should be retained for future reference. HEED WARNING: All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed. CLEANING: Unplug the unit from the wall outlet and leave for at least 30 min. - make sure the unit is not hot before you start cleaning. Use dry or damp soft cloth to clean the surfaces. Do not use sprays, abrasive or corrosive clean ...

little to no maintenance while bringing you optimal performance. Features џ 33/45/78rpm speed settings џ Ultra low-resonance adjustable suspension system џ 9” tonearm mount Inside you get џ Vibration-free direct drive brushless DC motor with integrated bearing џ Multilayer platter with special damping for best record interface and vibration control. џ All anodised aluminium construction INTRODUCTION 4 • Drive Method ……………….................................................….. Direct Drive • Motor ………………................. ...

phono stage. џTake the platter out of the case and carefully lower it onto the spindle, wide side up. џFollow the tonearm manufacturer’s instructions for installing the tonearm. џLevel the deck using the three adjustment knobs (pg.4) and leveler bubble on the top panel. Unpacking All Thrax Audio shipping boxes have been specially designed to protect their contents and special care has been taken to prevent damage under normal shipping conditions. Mishandling should be evident upon inspection of the shipping container. Carefully remove your new component from its ...

rack. This might create a parallel ground path that could degrade the sound of your system. • Connect the turntable to your phono stage or Step-Up Transformer • Connect the power supply to the power source indicated on the voltage selector card (visible by the main fuse), either 115 or 230 volts AC. You may select what voltage to use by means of the removable selector card located behind the fuse in the power connectors. Remove the card and reinstall so that the desired voltage may be read; be certain to change the fuse to the correct value. Connect the power s ...