Tenma UT202 Manual 

Title Page Overview ------------------------------------------------------------------------------------------------------------------------------- 2 Unpacking Inspection --------------------------------------------------- ...

Warnings and Notes strictly. Warning To avoid electric shock or personal injury, read the “Safety ...

Warning To avoid possible electric shock or personal injury, and to avoid possible damage to the Meter or to the equipment under test, adhere to the following rules: • Before using the Meter inspect the case. D ...

• Soft cloth and mild detergent should be used to clean the surface of the Meter when servicing. No abrasive and solvent should be used to prevent the surface of the Meter from corrosion, damage and accident. � ...

Functional Buttons(1) Below table indicated for information about the functional button operations. Rotary Switch Position Function OFF Power is turned of ...

No. Symbol Meaning 1 AC Indicator for AC voltage or current 2 DC Indicator for DC voltage 3 The battery is low. Warning: To avoid false readings, which could lead to possible electric shock or personal injur ...

No. Symbol Meaning 11 A Amperes (amps). The unit of current. 12 mV, V Volts. The unit of voltage.mV: Millivolt. 1x10-3 or 0.001 volts 13 Indicates negative reading 14 OL The input value is too large for the ...

circuits. If the circuit impedance is less than or equal to 10kΩ, the error is negligible (0.1 or less). ...

under test and remove testing leads from the input terminals. C.Measuring Resistance (see figure 5) (Figure 5) Warning To ...

• Resistance measurement is default to auto range mode. To remove the objects being tested from the circuit when m ...