Technaxx TX-83 Operation & User’s Manual

IP-Cam HD Outdoor with LED Floodlight TX-83 WiFi outdoor camera including LED floodlight lighting Important Hint regarding the User Manuals: All languages of the user manual you find on the CD enclosed. The english and german version of the user manuals you also find as printed version enclosed. Before using the device the first ...

...

“Konformitätserklärung”). Before using the device the first time, read the user manual carefully. Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and 42 cent/minute from mobile networks). Free Email: [email protected] Hin ...

Light source 0.5W / 24x high power LED / Ø 650 Lum Detection Angle 70°~80°, Range 6~10m, PIR 6~8m Lens F = 3.6mm @ F1.2; Horizonal 60.4°; Mount M12 Shutter 1/50 (1/60) seconds ~ 1/100000 seconds Time delay control 10 – 120 seconds Minimum illumination Colour: 1.0 L ...

Front view Side view No. Name Description 1 White light source The camera will use these in low-light conditions to generate a black and white image, even in total darkness. 2 Fixed hole The camera can be fixed on a wall with screw through this hole. 3 Microphone Allows the camera to pick up nearby sounds, and stream them with the video ...

The TX-83 works with iPhone and Android devices. Install the mobile APP and use your mobile for remote viewing/control your camera. The mobile APP is free to download for you, and is available from the respective Apple APP Store and Google Play Store. Install APP on Android 1. Open Google Play Store. 2. Search for “Security A ...

• Make sure product is fixed correctly and stable if fastened in place. • Do not operate if wires and terminals are exposed. • Apply for garden/square/wall/garage etc. Default Password Information • To ensure your privacy, this device supports password protection. • The default, all-access username is admin, the defa ...

Wait for about 90 seconds when the camera started up then operate according to the below steps: (1) Tap ”Settings” on your phone and go to “WIFI” option, look for the WIFI network named like “LEDCAM_XXXXXX”, please connect your phone to it by clicking on it. (2) Enter the WIFI password, default value is 0123456789, then click � ...

3.2.1 Preparation 1 Router 3 DC12V Connection 2 AC Wall Socket 4 RJ45 Connection ...

using the included Ethernet cable (or a longer one if required). (2) Connect the output of the supplied 12V power adapter into the power socket on the camera. (3) Plug the power adapter into the wall socket. Now the camera is initializing and it will last about 90 secon ...