Tamerica TCC1400F+ Operating Manual

When using electrical machines, basic precautions should always be followed to reduce the risk of electric shock and injury to people, including the following: 1. Read all instructions. 2. Always unplug the machine when not in use or before cleaning. 3. Do not use outdoors. 4. Extreme caution should be ...

A. LAMINATING FUNCTION (1) LAMINATION LOADING THE FILM Unpack the upper and lower rods. Remove the feed tray. Load the film onto the rods by turning the top rod clockwise and the bottom rod counter- clockwise as you push the rods through. Make sure to leave equal lengths of rod out of each end using the guide marks to correctly position ...

The top and bottom supply rolls should have about the same tension. By turning the top roll with one hand and the bottom roll with the other, it can be determined if one of the rolls is tighter than the other. Also, if the tension is not equal between the top and bottom rolls, the laminated product will curl. If it curls up when it ...

is in “STOP” position. To start laminating, put the Run/Stop switch on “RUN” position. 2. To put the lamination temporarily on hold without turning off the machine, user can turn the motor control switch to “STOP” position. ...

The top and bottom supply rolls should have about the same tension. By turning the top roll with one hand and the bottom roll with the other, it can be determined if one of the rolls is tighter than the other. Also, if the tension is not equal between the top and bottom rolls, the laminated product will curl. If it curls up when it ...

B. TEMPERATURE CONVERSION This machine can display temperatures in either Celsius or Fahrenheit. To change to either one, simply press and hold the “TEMP/SET” arrow keys simultaneously. C. GUIDE PLATES This machine is equipped with guide plates on the left and right sides of the ...

4. Never clean with scouring powders or hand implements. 5. Wipe clean with a soft cloth. 6 WARRANTY This machine is guaranteed against defects in materials and workmanship by the Manufacturer for a period of one (1) year from the date of original purchase from an authorized di ...