Talkpool OY1700 Operation & User’s Manual
Text of the manual
OY1700 LoRaWAN Air quality (PM) sensor, User manual, Version 0.1
2
Table of Contents
1
Disclaimer .............................................................................................................................. 3
1.1
Technical support ...............................................................................................................
OY1700 LoRaWAN Air quality (PM) sensor, User manual, Version 0.1
3
1 Disclaimer
This document represents information on products at the time of publication and is subject to
change without prior notice due to product improvements or other reasons. Talkpool makes
no warranties based on the accuracy or completeness of the contents of this document and
reserves
OY1700 LoRaWAN Air quality (PM) sensor, User manual, Version 0.1
4
3 Environmental
This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to dispose of
your waste by taking it to a collection point designated for the recycling of electrical and
ele
OY1700 LoRaWAN Air quality (PM) sensor, User manual, Version 0.1
5
4 Product Description
The OY1700 LoRaWAN Air quality (PM) sensor is designed to measure PM10, PM2.5,
PM1.0, temperature and humidity in indoor environments. The sensor is intended for indoor
climate control and monitoring indoor air quality. It is optimized for reliable and secure
operations.
OY1700 LoRaWAN Air quality (PM) sensor, User manual, Version 0.1
6
5 Installation and activation
The sensor consists of a bottom piece, the electronic board and the top cover. Remove the top
cover by pressing it upwards and outwards. The electronics are removed by releasing the
plastic latch on the top.
The bottom piece is mounted on the wall with the “UP�
OY1700 LoRaWAN Air quality (PM) sensor, User manual, Version 0.1
7
Configure the device in the LoRaWAN server, according to chapter 5.1, and power the device
with 5-24 VDC power, e.g. USB charger or 24 VDC. The cable can be routed through the
cable canal or through the electronic board for junction box mount. The sensor starts and
flashes 8 times during the
OY1700 LoRaWAN Air quality (PM) sensor, User manual, Version 0.1
8
5.1 LoRaWAN Configuration
Configuration on the network server is done with
AppEUI: 70-B3-D5-D7-2F-F8-17-00 (a.k.a. JoinEUI)
It is possible to order a batch of devices configured with a customer unique AppEUI from the
Talkpool OUI range.
The device is configured with device unique DevEUI and A