SLIK PRO 400DX Operating Instructions
Text of SLIK PRO 400DX Operating Instructions
Carrying the Tripod
Setting up
Pan Head mounting.post
(S)Prohibited
LtCaution
Carrying a tripod with a camera left on can
Prevent accidental equipment fall, or tripod tip
(S) Prohibited
PRO 400DX
Operating Instructions
Congratulations on the purchase of a SLiK PRO 400DX Tripod.
The SLIK Corporation has designed your tripod to be a sturdy,
rugged, dependable product that will provide you with many years of
satisfactory use.
Please take a few moments to re
Install the Handles
Storage
Washer Ring
Attach the two Pan Handles to the Pan Head, by inserting the shorter
Remove the Vertical Tilt Handle from the Pan Head, and screw into the
handle to the left, and the longer handle to the right. Do not reverse.
back of the Pan & Tilt Handle.
Make sure the washer ring on the thread stays on with the handle.
Attaching the camera to the Quick Release Platform
To remove the Quick Release Platform from the Pan Head, turn
Using the Pan Head (Continued)
Loosen the Vertical Tilt Handle, and the level can be adjusted.
LtCaution
When loosening either the Pan & Tilt Handle, or the Vertical Tilt Handle, take
precaution by keeping a firm grip on the handle until the Pan Head is locked
down.
Removing the Head from the Center Column
Use the following instructions if you wish to change heads, or attach
Set the new head, or accessory on the tripod's threaded post, and turn
accessories
Using the Center Column
Center Column
locking Collar
Center Column Stopper
Hold onto the Pan Head with one hand, and
loosen the Center Column locking Collar with
the other hand.
Raise or lower Pan Head to desired height, and
while maintaining a hold of the Pan Head, tight
en the locking Collar.
~Caution
(S) Prohibited
You may injure your hand by a sudden fall, if
you let go of the Pan Head before locking the
Collar.
Turn the locking Collar with your fing