Siemens PM330 Hardware Installation Manual

Hardware Installation Manual Firmware V4.7 SP10 12/2018 A5E32844552B AF Basic safety instructions 1 Introduction 2 Installing/Mounting 3 Connecting up, switching on 4 Service and maintenance 5 Technical specifications 6 Fundamental safet ...

Postfach 48 48 90026 NÜRNBERG GERMANY A5E32844552B AF Ⓟ 01/2019 Subject to change Copyright © Siemens AG 2013 - 2018. All rights reserved Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert sy ...

Hardware Installation Manual, 12/2018, A5E32844552B AF 3 Table of contents 1 Basic safety instructions .......................................................................................................................... 7 1.1 General safety instructions ....................................................................................................... 7 1.2 Handling electrostatic sensitive devices (ESD) ........................ ...

Power Module PM330 4 Hardware Installation Manual, 12/2018, A5E32844552B AF 5 Service and maintenance ...................................................................................................................... 63 5.1 Maintenance ........................................................................................................................... 63 5.2 Forming ............................................................... ...

Power Module PM330 Hardware Installation Manual, 12/2018, A5E32844552B AF 5 A Appendix............................................................................................................................................. 115 A.1 Further information on your converter .................................................................................. 115 A.1.1 Manuals for your inverter ................................................. ...

Hardware Installation Manual, 12/2018, A5E32844552B AF 7 Basic safety instructions 1 1.1 General safety instructions DANGER Electric shock and danger to life due to other energy sources Touching live components can result in death or serious injury. • Only work on electrical equipment if you are appropriately qualified. • Always observe the country-specific safety rules for all work. Generally, the following six steps apply when esta ...

1.1 General safety instructions Power Module PM330 8 Hardware Installation Manual, 12/2018, A5E32844552B AF WARNING Electric shock due to damaged equipment Improper handling of devices can cause damage. For damaged devices, hazardous voltages can be present at the enclosure or at exposed components; if touched, this can result in death or severe injury. • Ensure compliance with the limit values specified in the technical data du ...

1.1 General safety instructions Power Module PM330 Hardware Installation Manual, 12/2018, A5E32844552B AF 9 NOTICE Material damage due to loose power connections Insufficient tightening torques or vibration can result in loose power connections. This can result in damage due to fire, device defects, or malfunctions. • Tighten all power connections to the prescribed torque. • Check all power connections at regular intervals, pa ...

1.1 General safety instructions Power Module PM330 10 Hardware Installation Manual, 12/2018, A5E32844552B AF WARNING Motor fire in the event of insulation overload There is a greater load on the motor insulation through a ground fault in an IT system. If the insulation fails, it is possible that death or severe injury can occur as a result of smoke and fire. • Use a monitoring device that signals an insulation fault. • Correct ...

1.2 Handling electrostatic sensitive devices (ESD) Power Module PM330 Hardware Installation Manual, 12/2018, A5E32844552B AF 11 WARNING Unexpected movement of machines caused by inactive safety functions Inactive or non-adapted safety functions can trigger unexpected machine movements that may result in serious injury or death. • Observe the information in the appropriate product documentation before commissioning. • Carry out ...

1.3 Industrial security Power Module PM330 12 Hardware Installation Manual, 12/2018, A5E32844552B AF 1.3 Industrial security Note Industrial security Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously ...

1.4 Residual risks of power drive systems Power Module PM330 Hardware Installation Manual, 12/2018, A5E32844552B AF 13 WARNING Unsafe operating states resulting from software manipulation Software manipulations (e.g. viruses, trojans, malware or worms) can cause unsafe operating states in your system that may lead to death, serious injury, and property damage. • Keep the software up to date. • Incorporate the automation and dr ...

1.4 Residual risks of power drive systems Power Module PM330 14 Hardware Installation Manual, 12/2018, A5E32844552B AF 1.4 Residual risks of power drive systems When assessing the machine- or system-related risk in accordance with the respective local regulations (e.g. EC Machinery Directive), the machine manufacturer or system installer must take into account the following residual risks emanating from the control and drive compo ...

Hardware Installation Manual, 12/2018, A5E32844552B AF 15 Introduction 2 Power Module - PM330 The PM330 Power Module is a part of the modular family of SINAMICS G120 inverters. PM330 Power Modules have been specifically optimized for driving pumps, fans, blowers and compressors with square-law load characteristic for use in HVAC applications. The Power Module is available with the "internal air cooling" cooling method. The Power Modules ...

16 Hardware Installation Manual, 12/2018, A5E32844552B AF Figure 2-1 PM330 block diagram ...

Hardware Installation Manual, 12/2018, A5E32844552B AF 17 Note Principle of the precharging circuit SINAMICS PM330 Power Modules include a half-controlled thyristor bridge as rectifier circuit. As a result of the precharging principle with phase control, precharging is only started when all of the enable signals are available and by setting the ON/OFF command (p0840 = 1). The DC link is then fully charged after approximately ...