ProSoft Technology PLX35-NB2 Operation & User’s Manual

ProSoft Technology, Inc. Your Feedback Please We always want you to feel that you made the right decision to use our products. If you have suggestions, comments, compliments or complaints about our products, documentation, or support, please write or call us. How to Contact Us ProSoft Technology, Inc ...

Page 3 of 70 Important Installation Instructions Power, Input, and Output (I/O) wiring must be in accordance with Class I, Division 2 wiring methods, Article 501- 4 (b) of the National Electrical Code, NFPA 70 for installation in the U.S., or as specified in Section 18-1J2 of the Canadian ...

ProSoft Technology, Inc. Contents Your Feedback Please ...................................................................................................................... 2 How to Contact Us ........................................................................................................... ...

Page 5 of 70 5.4 Adding Team Members .......................................................................................... 60 5.4.1 Editing Team Member Access ............................................................................... 62 5.5 Changing Firmware .................... ...

Page 6 of 70 1 Start Here 1.1 About the PLX35-NB2 Network Bridge The PLX35-NB2 Network Bridge is the ideal solution for system integrators, machine builders, and OEMs requiring remote system access for commissioning, troubleshooting, or network maintenance. During the commissioning phas ...

Page 7 of 70 1.1.1 Specifications Power Power 24 VDC nominal, 10 to 36 VDC allowed, Positive, Negative, and GND terminals Power Connector Three pin, screw terminal, screw retention, black Current Load 24 VDC nominal @300 mA Internal Specs EtherNet/IP Supports local control of VPN access ...

ProSoft Technology, Inc. 1.2 PLX35-NB2 Package Contents The following components are included with the PLX35-NB2 and are required for installation and configuration. Important: Before beginning the installation, please verify all of the following items are present. Qty. Part Name Part Number Part D ...

Page 9 of 70 1.4 Failover and Automatic Backup & Factory Reset 1.4.1 Failover The Failover process provides a recovery mechanism whenever a serious malfunction renders the main filesystem inoperable. If the system fails to boot up (all LEDs are solid on) 4 times in a row, on the 5th boo ...

ProSoft Technology, Inc. 2 Quick Start 2.1 Local Configuration Task Page Install the module 11 Connect to the PLX35-NB2 webpage 14 Set gateway configuration parameters 16 Configure login credentials 21 Update firmware 45 2.2 ProSoft Connect Setup and Configuration ProSoft Connect allows you to re ...