ProLights ECLFR2KPTU-DY Operation & User’s Manual

reproduced in any form or by any means for any commercial use. In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice. All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it REV.01-04/20 ...

• User manual TABLE OF CONTENTS Safety Symbols Symbols General instructions General instructions Approvals Approvals Fire prevention Fire prevention Electric shock prevention Electric shock prevention Photobiological safety Photobiological safety Warnings Warnings Waste Electrical and Electronic Equipment Directive Waste Electrical and Electronic Equipment Directive (WEEE) (WEEE) 1 Technical drawing 1. 1 Operating elements and connections 1. 1 Operating elements and connections 2 Installation 2. 1 Mounting 2. 1 Mounting 3 Func ...

manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. T 45°C a ELECTRIC SHOCK RISK READ THE USER MANUAL GENERAL RISK / ATTENTION DO NOT STARE AT THE OPERATING LIGHT SOURCE WASTE ELECTRICAL & ELECTRONIC EQUIPMENT MAX OPERATING ...

• The connection to the main network of electric distribution must be carried out by a qualified electrical installer. • Before starting any maintenance work or cleaning the projector, cut off power from the main supply. • Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac- cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units from indirect contact and/or shorting to earth by using appropriately sized residual current devices. • Do n ...

• Emits potentially dangerous optical radiation. It falls into the categories of the risk group according to EN 62471. • Do not look directly at the LED source during operation. It can be harmful to the eyes. Warnings • This device is rated IP20. It is not suitable for use in humid places. Never use the fixture in places subject to vibrations or bumps. • Make certain that no inflammable liquids, water or metal objects enter the fixture. Waste Electrical and Electronic Equipment Directive (WEEE) • The unit, accessories an ...

15 10 Fig.2 ECLFR2KPTU-DY 6 1.1 OPERATING ELEMENTS AND CONNECTIONS 1. VENTILATION GRID for air flow outlet not to be obstructed. 2. HANDLE 3. CONTROL PANEL with display and a knob used to access the control panel functions and manage them. 4. ZOOM ADJUSTMENT AND FOCUS knob to zoom the projected image clearly. 5. LENS 6. SPIGOT 7. POLE OPERATED BRACKET 8. GEL FILTER FRAM 9. BARN DOOR with directional flaps to adjust the light beam. 10. MAIN FUSE HOLDER: replace a burnt-out fuse by one of the same type only 11. POWER IN (PowerCON TRUE IN): for connection to a socket (100-240V~/50-60Hz) via the supplied ...

2.1 MOUNTING ECLFR2KPTU-DY is designed for applications in exhibition areas, commercial spaces, museums, restaurant, churches, and any other installation where size is an important factor. For fixing, stable mounting clips are required. The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installation, always comply scrupulously with all the regulations (particularly re- garding safety) currently in force in the country in which the fixture’s being used. • Install the projector at a suitable location. • Always additi ...

3.1 OPERATION To turn ECLFR2KPTU-DY connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation and can be operated via a DMX controller. To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recommended to connect the unit to a socket which can be switched on and off via a light switch. 3.2 BASIC The ECLFR2KPTU-DY has a display and 1 knob for access to the control panel functions (fig.4). Knob Used to access the menu, to return a previous menu option, to navigate through the menu, to select and store the current ...

BASIC 2CH 2 BASIC 3CH STANDARD 5CH 2 SETUP ð Screen ð Back Light ð On 10S 20S 30S Flip Display ð No-Yes 3 ADVANCED ð Dimmer Mode ð Off Dimmer 1 Dimmer 2 Dimmer 3 Led Frequency ð 600Hz 1200 Hz 2000 Hz 4000 Hz 6000Hz 25kHZ Fan Mode ð Auto On Off Silent Factory Reload ð No-Yes 4 INFORMATION ð Fixture Hours ð 0-9999 Version ð V1.0 UID ð 15D0022A**** 5 STAND ALONE ð Master/Slave ð Master/Slave Effects ð Effect 1 ð Speed 1~100 Effect 2 Effect 3 Effect 4 Static ð Dimmer ð Value ( 0~255) Strobe 9 ECLFR2KPTU-DY 3.3 MENU STRUCTURE ...

To set DMX addressing follow the instructions below: • Press the knob to enter the menu mode. • Use the knob to select Connect. Press the knob to confirm. • Rotate the knob to select DMX Address. Press the knob to confirm. • Rotate the knob to select the desired value 001-512. Press the knob to confirm. • Press repeatedly the knob to return the menu mode. To able to operate the ECLFR2KPTU-DY with a light controller, adjust the DMX start address for the first a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX channel, adjust the start address 3 ...

DMX Address: 33 DMX Address: 42 DMX Address: 36 DMX Address: 39 Fig.5 - Example 3 DMX channels configuration . . . . . . . . . . . . DMX512 Controller 11 ECLFR2KPTU-DY 3.7 SCREEN It is possible to modify the following parameters, related to the display, following the same procedure: • Press the knob to access the main menu. • Rotate the knob to scroll through the menu, select Set Up, then press the knob access the next menu. • Press the knob to select Screen and press the knob to proceed. • Select the proposed option with the knob and press the knob to confirm. - Backlight - Auto Off display ba ...

- Factory Reload - To reset the unit. Select Yes or No and select the knob to confirm. • Press repeatedly the knob to return the menu mode. 3.9 INFORMATION To view all the information on the device, proceed as follows: • Press the knob to access the main menu. Rotate the knob to select Information, then press it to access the next menu. • Rotate the knob to scroll through the menu, then select one of the following informationa nd press it to display it. - Fixture Time - To view the operating time of the projector. - Software Version - To v ...

2 CHANNELS 2 MODE FUNCTION DMX Value 2 Ch 1 DIMMER 0~100% 000 - 255 2 STROBE NO Function Strobe Slow to Fast 000 - 010 011 - 255 3 CHANNELS MODE FUNCTION DMX Value 3 Ch 1 DIMMER 0~100% 000 - 255 2 DIMMER FINE 0~100% 000 - 255 3 STROBE NO Function Strobe Slow to Fast 000 - 010 011 - 255 5 CHANNELS MODE FUNCTION DMX Value 5 Ch 1 DIMMER 0~100% 000 - 255 2 STROBE NO Function Strobe Slow to Fast 000 - 010 011 - 255 3 AUTO PROGRAMS No Function Auto Program 1 Auto Program 2 Auto Program 3 Auto Program 4 000 - 010 011 - 070 071 - 130 131 - 190 191 - 255 4 AUTO SPEED Auto speed slow to fast 000 - ...

DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped- ance and low capacity. The following diagram shows the connection mode: ATTENTION The screened parts of the cable (sleeve) must never be connected to the system’s earth, as this would cause faulty fixture and controller operation. Over long runs can be necessary to insert a DMX level matching amplifier. For those connections the use of balanced microphone cable is not recommended because it cannot transmit control DMX data reliably. • Connect the controller DMX input to the DMX output of the ...

4.1 MAINTENANCE AND CLEANING THE UNIT • Make sure the area below the installation place is free from unwanted persons during setup. • Switch off the unit, unplug the main cable and wait until the unit has cooled down. • All screws used for installing the device and any of its parts should be tightly fastened and should not be corroded. • Housings, fixations and installation spots (ceiling, trusses, suspensions) should be totally free from any deformation. • The main cables must be in impeccable condition and should be replaced immediately even when a small problem is detected. • It is recommended to ...

La riproduzione - anche parziale - per propri scopi commerciali è vietata. Al fine di migliorare la qualità dei prodotti, la Music&Lights S.r.l. si riserva la facoltà di modificare, in qualunque momento e senza preavviso, le specifiche menzionate nel presente manuale di istruzioni. Tutte le revisioni e gli aggiornamenti sono disponibili nella sezione 'Manuali' sul sito www.musiclights.it ...

• Manuale utente Contenuto dell'imballo: INDICE Sicurezza Simboli Simboli Avvertenze generali Avvertenze generali Omologazioni Omologazioni Prevenzione incendi Prevenzione incendi Prevenzione delle scosse elettriche Prevenzione delle scosse elettriche Sicurezza fotobiologica Sicurezza fotobiologica Avvertenze Avvertenze Direttiva sui rifiuti di apparecchiature elettriche ed Direttiva sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE) elettroniche (RAEE) 1 Disegno tecnico 1. 1 Elementi di comando e di collegamento 1. 1 Elementi ...

questo manuale e conservarlo accuratamente per riferimenti futuri. Contiene informazioni importanti riguardo l’installazione, l’uso e la manutenzione dell’unità. SIMBOLI T 45°C a RISCHIO DI SCOSSE ELETTRICHE LEGGERE IL MANUALE UTENTE RISCHIO GENERALE / ATTENZIONE NON CONSERVARE ALLA FONTE DI LUCE DI FUN- ZIONAMENTO RIFIUTI ATTREZZATURE ELETTRICHE ED ELETTRONICHE TEMPERATURA AMBIENTE OPERATIVA MASSIMA USO INTERNO PUNTO DI FISSAGGIO PER CAVO DI SICUREZZA CONFORMITÀ DELL'UNIONE EUROPEA ...