Premise CS3 Series Installation Instructions

Text of Premise CS3 Series Installation Instructions

Before assembling your fixture,

please make sure that you carefully read through this instruc:on sheet. Consider having your fixture installed by a qualified licensed electrician. Note: The important safeguards and instruc:ons that appear in this sheet are not meant to cover all possible condi:ons and situa:ons that m

GENERAL WIRING DIAGRAM

NOTE: Always turn off the power supply from main circuit breaker before beginning. 1.  Remove the end caps from both ends of the fixture, then remove the lens. 2.  Open the wiring cover and make the wiring connec:ons with terminal cap (refer to the General Wiring Diagram), then mount the fixture onto the ceiling with moun:ng s

TO CHAIN HANG THE FIXTURE

NOTE: Always turn off the power supply from main circuit breaker before beginning. 1.  Install the hanging hooks (included) onto the top of the fixture. Make sure the wiring hangers are fully engaged into the holes on the top channel. 2.  Hook the chain onto the hanging hooks, then onto the ceiling anchors (not provided). 3.

2 & 3

4 5 3 TO INSTALL END-TO-END NOTE: Always turn off the power supply from main circuit breaker before beginning. 1.  Remove the end caps and lenses of the fixtures you are connec:ng end-to-end. 2.  For the first fixture (where power will be directly connected), open the wiring cover and make the wiring connec:ons with terminal cap (refer to the

Premise Lighting Equipment Owners Instructions: