Premise CW2 Series Installation Instructions
Text of Premise CW2 Series Installation Instructions
Before assembling your fixture,
please make sure that you carefully
read through this instruction sheet.
Ensure your fixture is installed by a
qualified licensed electrician.
Note: The important safeguards and
instructions that appear in this sheet
are not meant to cover all possible
conditions and situations that may
oc
The LED Wraparound consists of three components: the housing (A) diffuser (C), and end
pieces (D).
HOW TO INSTALL THE WRAPAROUND
1. Insert the two Small Pin Cross Machine
Screws (AA) into the junction box. Do not
tighten.
2. Remove the diffuser (C) Do this by
removing the two screws attached to an
end piece (D), then sliding the diffuser
HOW TO INSTALL CONTINUED
4. Attach the fixture housing (A) to the
junction box by aligning the holes on the
housing with the the two Small Pin Cross
Machine Screws (AA) on the junction box
from Step 1.
5. Turn the housing (A) clockwise to lock
the fixture in place, then tighten the Small
Pin Cross Machine Screws (AA) to secure.
6. With the fixture secured,