Polanik ZFFC Technical Specification, Assembly Manual
Text of Polanik ZFFC Technical Specification, Assembly Manual
Technical specification and instruction manual
ZFFC
1 / 13
TECHNICAL SPECIFICATION
ASSEMBLY MANUAL
Photo finish set
ZFFC
File: 2016-03-04
PRODUCT SUPPORT
Pawel Ciechanowski
[email protected]
Technical specification and instruction manual ZFFC
2 / 13
I. General description
ZFFC competition photo finish set is the complete system which lets you conduct all track events in the
athletics. The main element of the system is a professional photo finish camera with timing feature and colour
module. The camera takes pictures with the speed of 2000 frames/s. Special computer software assembles the
pictures to form images of the finish line with competi
Technical specification and instruction manual ZFFC
3 / 13
Part code
Image
Description
Q-ty
STM
tripod
1 pc
GST
tripod head
1 pc
CB
capture button with USB to serial
converter
1 pc
CS-NC
start sensor normally closed NC
1 pc
Technical specification and instruction manual ZFFC
4 / 13
Part code
Image
Description
Q-ty
RS-START9
starting revolver with impulse wire
1 pc
PNB-150
start signal cable 150 m on spool lets you
connect the revolver to the junction box
1 pc
ODZ
athletics competition management
software
1 pc
KL
laptop
1 pc
DL
laser printer
1 pc
Items not included
Plumb bob and string. The plumb bob is available at your local hardware store, and you can use virtual
Technical specification and instruction manual ZFFC
5 / 13
III. Quick Start Guide
Step 1: Install the software
Install using the Lynx Resource CD or download the latest version of
FinishLynx at: www.finishlynx.com/product/software/finishlynxresults-
software/
Follow the instructions on your screen to install FinishLynx. When
prompted, enter the serial numbers found on the back of your CD
case.
1) Start FinishLynx by clicking the Windows Start button and
s
Technical specification and instruction manual ZFFC
6 / 13
choose Small or Large Icons.
2. Find and double click on Network and Sharing Center. They
are listed alphabetically by icon name.
3. This will open the Network and Sharing Center. On the left is a
blue section titled Control Panel Home.
4. Click on the Change Adapter Settings icon.
5. A new window will open displaying your network connections.
Right click on the Wireless Network Connection and sel
Technical specification and instruction manual ZFFC
7 / 13
Step 5: Attach the camera to the tripod
1. If using the optional remote positioner, secure it to the camera
bottom by turning the black handled thumbscrew. Make sure
the FinishLynx label faces in the same direction as the camera
lens will face.
Note: Cables omitted for clarity and actual lens may vary from model shown
2. Connect the cable that comes with the remote positioner to the
port on the po