Philips AC5659 Operation & User’s Manual

All rights reserved. 4241 210 97903 AC5659 EN User manual 1 ZH-T 使用手冊 19

3 11 7 15 21 3’ 19 5 13 9 17 6 14 10 3’ 18 24 4 12 8 16 23 22 3’ 20 3’ 25 27 3’ 31 35 33 3’ 3’ 32 29 28 26 30 34

5 Product overview (fig.a)   5 Controls overview (fig.b)   5 3 Getting started   6 Installing the filters   6 Wi-Fi connection   6 4 Using the air purifier   7 Understanding the air quality light   7 Turning on and off   8 Changing the Auto mode setting   8 Changing the fan speed   9 Using the light on/off function   9 Switching the display indicator   9 Setting the child lock   10 5 Cleaning   10 Cleaning the body of the air purifier   10 Cleaning the air outlet cover   11 Cleaning the air quality sensor   11 Cleaning the pre-filter   11 6 Replacing the filters   12 Filter replacement indicator   12 Replacing the filters   12 Filter reset   13 7 Storage   14 8 Troubleshooting   15 9 Guarantee and service   17 Order parts or accessories   17 10 Notices   17 Electromagnetic fields (EMF)   17 Recycling   18 Notice   18 Environmental friendly paper used. Thanks for your contribution to save trees.

you use the appliance, and save it for future reference. Danger • Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard. • Do not clean the appliance with water, any other liquid, or a (flammable) detergent to avoid electric shock and/ or a fire hazard. • Do not spray any flammable materials such as insecticides or fragrance around the appliance. Warning • Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance. • If the power cord is damaged, you must have it replaced by Philips, a service center authorized by Philips, or similarly qualified persons in order to avoid a hazard. • Do not use the appliance if the plug, the power cord, or the appliance itself is damaged. • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Child shall not play with the appliance. Cleaning and maintenance shall not be made by children without supervision. • Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of the air inlet.

objects do not fall into the appliance through the air outlet. • Standard WiFi interface based on 802.11b/g/n at 2.4 GHz with a maximum output power of 31.62 mW EIRP. Caution • This appliance is not a substitute for proper ventilation, regular vacuum cleaning, or use of an extractor hood or fan while cooking. • If the power socket used to power the appliance has poor connections, the plug of the appliance becomes hot. Make sure that you plug the appliance into a properly connected power socket. • Always place and use the appliance on a dry, stable, level, and horizontal surface. • Leave at least 20cm free space behind and on both sides of the appliance and leave at least 30cm free space above the appliance. • Do not place anything on top of the appliance. • Do not sit or stand on the appliance. Sitting or standing on the appliance may lead to potential injury. • Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance. • Make sure all filters are properly installed before you switch on the appliance. • Only use the original Philips filters specially intended for this appliance. Do not use any other filters. • Combustion of the filter may cause inreversible human hazard and/or jeopardize other lives. Do not use the filter as fuel or for similar purpose. • Avoid knocking against the appliance (the air inlet and outlet in particular) with hard objects.

radio-controlled clocks. • The appliance is only intended for household use under normal operating conditions. • Do not use the appliance in wet surroundings or in surroundings with high ambient temperatures, such as the bathroom, toilet, or kitchen. • The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals. • If you need to move the appliance, disconnect the appliance from the power supply first. • Do not move the appliance by pulling its power cord. • Always cleanse your hands after changing the filters. • Do not insert your fingers or objects into the air outlet or the air inlet to prevent physical injury or malfunctioning of the appliance. • Do not use this appliance when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense, or chemical fumes. • Do not use the appliance near gas appliances, heating devices or fireplaces. • Always unplug the appliance after use and before cleaning, or carrying out other maintenance or replacing the filters. • Do not use the appliance in a room with major temperature changes, as this may cause condensation inside the appliance. • To prevent interference, place the appliance at least 2 meters away from electrical appliances that use airborne radio waves all-guides.c om

Control buttons I Power on/off button J Light on/off button K Auto mode button L Fan speed button M Child lock button N Reset button Display panel: Sleep mode Speed 1 Speed 2 Speed 3 Turbo mode Filter replacement alert Pre-filter cleaning alert Wi-Fi indicator Gas display PM2.5 display Indoor Allergen Index display General mode Allergen mode Bacteria & Virus mode Child lock indicator 2 Your air purifier Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Product overview (fig.a) A Control buttons B Air outlet cover C Air quality sensor D Display panel E NanoProtect filter HEPA Series 3 (FY5185) F NanoProtect filter Active Carbon (FY5182) G Pre-filter H Side covers

Installing the filters Note • There is one set of filters on each side of the appliance. Each side is equipped with one pre-filter and one air purification filter. • Make sure that you place the air purification filter in the appliance first and then the pre-filter. • Make sure that the side with the tag is pointing towards you when installing the filter. 1 Pull the top part of the side panel to remove it from the air purifier (fig.c). 2 Press the two clips down (1) and pull the pre-filter towards you (2) (fig.d). 3 Remove all filters (fig.e). 4 Remove all packaging materials from the filters (fig.f). 5 Place the thick filter (FY5185) into the air purifier and then the thin AC filter (FY5182). The model numbers are shown on each filter (fig.g). 6 Attach the pre-filter back into the air purifier (fig.h). Note • Make sure the side with the two clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the purifier. 7 Reattach the front panel by pressing the top part of the panel onto the top of the air purifier (1). Then, gently push the panel against the body of the air purifier (2) (fig.i). 8 Repeat the above steps and assemble the filter for the other side of the air purifier. 9 Wash your hands thoroughly after installing filters. Wi-Fi connection Setting up the Wi-Fi connection for the first time 1 Download and install the Philips "Clean Home+" app from the App Store or Google Play. 2 Put the plug of the air purifier in the power socket and touch to turn on the air purifier. » » The Wi-Fi indicator blinks orange for the first time. 3 Make sure that your smartphone or tablet is successfully connected to your Wi-Fi network. 4 Launch the "Clean Home+" app and click on "Connect a New Device" or press the "+" button on the top of the screen. Follow the onscreen instructions to connect the air purifier to your network. 5 After the successful pairing and connection, the Wi-Fi indicator will light up white. If pairing is not successful, consult the troubleshooting section, or the help section in the "Clean Home+" App for extensive and up-to-date troubleshooting tips.

purifier Understanding the air quality light IAI is a real-time numerical display that provides visual and immediate feedback on indoor allergen level. IAI Air quality light color Air quality level 1-3 Blue Good 4-6 Blue-Purple Fair 7-9 Purple-Red Poor 10-12 Red Very poor The air quality light automatically goes on when the air purifier is switched on, and lights up all colors in sequence. After approximately 30 seconds, the air quality sensors select the color that corresponds to the surrounding air quality of airborne particles. IAI The professional-grade AeraSense sensor detects the level of indoor air allergen and with numerical feedback from 1 to 12 the potential risk level of indoor air allergens can be displayed. 1 indicates best air quality. GAS With an advanced as sensor, a display ranging from L1 to L4 shows the density level of potential harmful gases (incl. VOC, odor, etc.) detected. L1 indicates best air quality. Note • This instruction is only valid when the air purifier is being set up for the first time. If the network has changed or the setup needs to be performed again, consult section "Reset the Wi-Fi connection" on page 7. • If you want to connect more than one air purifier to your smartphone or tablet, you have to do this one by one. Complete the set up of one air purifier before you turn on the other air purifier. • Make sure that the distance between your smartphone or tablet and the air purifier is less than 10 m without any obstructions. • This App supports the latest versions of Android and iOS. Please check www.philips.com/cleanhome for the latest update of supported operating systems and devices. Reset the Wi-Fi connection Note • This applies when the default network to which your purifier is connected has changed. • Reset the Wi-Fi connection when your default network has changed. 1 Put the plug of the air purifier in the power socket and touch to turn on the air purifier. 2 Touch and simultaneously for 3 seconds until you hear a beep. » » The air purifier goes to pairing mode. » » The Wi-Fi indicator blinks orange. 3 Follow the steps 4-5 in "Setting up the Wi-Fi connection for the first time" section.

Note • Always place the air purifier on a stable, horizontal, and level surface with the front of the unit facing away from walls or furniture. • For optimum purification performance, close doors and windows. • Keep curtains away from the air inlet or air outlet. 1 Put the plug of the air purifier in the power socket. » » The air purifier beeps. » » All lights go on once and then go out again. 2 Touch to switch on the air purifier (fig.j). » » The air purifier operates under the allergen mode by default. » » When the air purifier is warming up, " " displays on the screen. After measuring the particulate matter only in the air, the air purifier shows the IAI level and operates in the auto mode with displayed on the screen (fig.k). » » After 30 seconds, the air purifier shows the IAI level on the screen. The air quality sensor automatically selects the appropriate air quality light color. 3 Touch and hold for 3 seconds to switch off the air purifier. Note • If the air purifier stays connected to the electrical outlet after turning OFF, the air purifier will operate under the previous settings when turned ON again. Changing the Auto mode setting You can choose the Allergen mode (  ), the General mode (  ) or the Bacteria & Virus mode ( ). Allergen mode The extra-sensitive allergen mode is designed to react to even a small change in allergen levels in the surrounding air. • Touch the Auto mode button to select the Allergen mode (fig.l). » » Auto ( ) and  display on the screen. General mode A smart auto-setting that automatically adjusts the air purifier’s settings to the ideal level. • Touch the Auto mode button to select the General mode (fig.m). » » Auto ( ) and display on the screen. Bacteria & Virus mode The bacteria & virus mode boosts the airflow to quickly reduce bacteria & viruses. • Touch the Auto mode button to select the Bacteria & Virus mode (fig.n). » » Auto ( ) and display on the screen.

function With the light on/off button, you can switch on or off the air quality light, the display screen and the function indicator if desired. 1 Touch the light on/off button once, the air quality light will be dimmed. 2 Touch the light on/off button again, the air quality light will go off. 3 Touch the light on/off button for the third time, all lights will be on again. Switching the display indicator The air purifier has three display indicators, IAI index, PM2.5 index, and Gas level. Note • The air purifier operates in IAI index by default. 1 Touch the light on/off button for 3 seconds to switch to PM2.5 display mode (fig.r) . » » The PM2.5 level displays on the screen. 2 Touch the light on/off button for 3 seconds again to switch back to IAI display mode (fig.s). » » The IAI indicator and the actual IAI index display on the screen. Changing the fan speed In addition to the Auto modes, there are several fan speeds available. When using the manual fan speed settings, the purifier will still monitor the air quality, but it will not automatically adjust the fan speed if it detects changes in the air quality. Sleep mode ( ) In sleep mode, the air purifier operates quietly at a very low speed. • Touch the fan speed button to select the sleep mode (SL) (fig.o). » » The " " displays on the screen. » » The sleep mode indicator goes on. Manual • Touch the fan speed button repeatedly to select the fan speed you need (fig.p): (Speed 1) (Speed 2) (Speed 3) Turbo (t) In turbo mode, the air purifier operates on the highest speed. • Touch the fan speed button to select the turbo mode ( ) (fig.q). » » The " " displays on the screen. » » The turbo speed indicator goes on. all-guides.c om

unplug from the electrical outlet before cleaning. • Never immerse the air purifier in water or any other liquid. • Never use abrasive, aggressive, or flammable cleaning agents such as bleach or alcohol to clean any part of the air purifier. • Only the pre-filter is washable. The air filters are not washable. • Do not attempt to clean the filters or air quality sensor with a vacuum. Cleaning the body of the air purifier Regularly clean the inside and outside of the air purifier to prevent dust from collecting. 1 Use a soft, dry cloth to clean both the interior and exterior of the air purifier. 2 The air outlet can also be cleaned with a dry, soft cloth. 3 Touch the light on/off button for 3 seconds again to switch to Gas level display (fig.t). » » The Gas indicator and the actual Gas level display on the screen. Note • It is possible that the air quality light may still be red even if the PM2.5 index is very low. It's normal. This is because that at least one of the index ( the IAI index or Gas level) is high that turns the air quality light to red. The appliance real-time displays the air quality index with the highest risk. Setting the child lock 1 Touch and hold the child lock button for 3 seconds to activate child lock (fig.u). » » The child lock icon displays on the screen. » » When the child lock is on, all the other buttons are not responsive. 2 Touch and hold the child lock button for 3 seconds again to deactivate child lock. » » The child lock icon disappears. Note • You can still control the appliance through the App even child lock is activated.

cover 1 To unlock the air outlet cover, grab the handle on the cover and pull the cover up (fig.v). 2 Clean the cover with a brush (fig.w). 3 To reattach the cover, mount it onto the top of the appliance first, and then push the side with the handle towards the appliance (fig.x). Cleaning the air quality sensor Clean the air quality sensor every two months for optimal functioning of the appliance. Clean it more frequently if you use the appliance in a dusty environment. Note • If the air purifier is used in a dusty environment, it may need to be cleaned more often. • If the humidity level in the room is very high, condensation may develop on the air quality sensor and the air quality light may indicate a poorer air quality even though the air quality is actually good. If this occurs, clean the air quality sensor or use the air purifier on a manual speed setting. 1 Switch off the air purifier and unplug from the power socket. 2 Clean the air quality sensor inlet and outlet with a soft brush (fig.y). 3 Open the air quality sensor cover (fig.z). 4 Clean the air quality sensor, the dust inlet and the dust outlet with a damp cotton swab (fig.{). 5 Dry all parts thoroughly with a dry cotton swab. 6 Reattach the air quality sensor cover (fig.|). Cleaning the pre-filter Clean the pre-filter when F0 is displayed on the screen and the pre-filter cleaning indicator is on (fig.}). 1 Switch off the air purifier and unplug from the power socket. 2 Pull the top part of the side panel to remove it from the air purifier (fig.c). 3 Press the two clips down (1) and pull the pre-filter towards you (2) (fig.d). 4 If the pre-filter is very dirty, use a soft brush to brush away the dust. Then wash the pre-filter under running tap water (fig.~). 5 Allow the pre-filter to air dry thoroughly before placing back in the air purifier. 6 Put the pre-filter back into the air purifier (fig.h).

filter, make sure it air dries completely after cleaning. • Wash your hands after handling the filter. • Make sure the side with the two clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the air purifier. 7 To reattach the front panel, press the top part of the panel onto the top of the air purifier (1). Then, gently push the panel against the body of the air purifier (2) (fig.i). 8 Put the plug of the air purifier in the power socket. 9 Touch the button to switch on the appliance. 10 Touch and hold the reset button for 3 seconds to reset the pre-filter cleaning time. 11 Wash your hands thoroughly after installing filters. 6 Replacing the filters Filter replacement indicator This air purifier is equipped with a filter replacement indicator to make sure that the air purification filter is in optimal condition when the air purifier is operating. When the filters need to be replaced, the filter code displays on the screen (see Filter alert chart). If the filters are not replaced in time, the air purifier will stop operating and automatically lock to protect the air quality in the room. Replace the filters as soon as possible according to the filter code. Replacing the filters Note • The air filters are not washable or reusable. • Always turn off the air purifier and unplug from the electrical outlet before replacing the filters. • Do not clean the filters with a vacuum. • If the pre-filter is damaged, worn or broken, do not use. Visit www.philips.com/support or contact the Consumer Care Center in your country.

• This air purifier has no other user- serviceable parts. For assistance, contact the Consumer Care Center in your country. Filter reset You can replace filters even if there is no filter replacement code displayed on the screen. After replacing a filter, you need to reset the filter lifetime counter manually. 1 Touch and simultaneously for 3 seconds to enter the filter reset mode (fig.€). » » Code (A3) of the NanoProtect filter HEPA Series 3 displays on the screen. 2 Touch and hold for 3 seconds to force reset the filter lifetime counter of the NanoProtect filter HEPA Series 3 (fig.;). 3 Code (C7) of the NanoProtect filter Active Carbon displays on the screen after the lifetime counter of the NanoProtect filter HEPA Series 3 has been reset (fig.‚). 4 Touch and hold for 3 seconds to force reset the filter lifetime counter of the NanoProtect filter Active Carbon and exit the filter reset mode (fig.ƒ). Filter alert chart Filter alert light status Action A3 displays on the screen and the filter replacement alert goes on Replace the NanoProtect filter HEPA Series 3 (FY5185) C7 displays on the screen and the filter replacement alert goes on Replace the NanoProtect filter Active Carbon (FY5182) A3 and C7 display on the screen alternately and the filter replacement alert goes on Replace both filters 1 Turn off the air purifier and unplug from the power socket. 2 Take out the used air filter according to the filter alert light status displayed on the screen. Discard used filters (fig.5). Note • Do not touch the pleated filter surface, or smell the filters as they have collected pollutants from the air. 3 Remove all packaging material from the new filters (fig.f). 4 Place the new filters into the air purifier (fig.g). 5 Put the plug of the air purifier in the power socket. 6 Touch and hold the reset button for 3 seconds to reset the filter lifetime counter.

from the power socket. 2 Clean the air purifier, air quality sensor and pre-filter (see chapter ‘Cleaning’). 3 Let all parts air dry thoroughly before storing. 4 Wrap the filters and pre-filters separately in air tight plastic bags. 5 Store the air purifier, filters and pre- filters in a cool, dry location. 6 Always thoroughly wash hands after handling filters. all-guides.c om

appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country. Problem Possible solution The air purifier does not work even though it is plugged into the power socket and switched on. • Check if the top cover is properly installed. • The filter replacement light has been on continuously but you have not replaced the corresponding filter. As a result, the appliance is now locked. In this case, replace the filter and reset the filter lifetime counter. The airflow that comes out of the air outlet is significantly weaker than before. • The pre-filter is dirty. Clean the pre-filter (see chapter "Cleaning"). The air quality does not improve, even though the air purifier has been operating for a long time. • Check if the packing material is removed from the filters. • One of the filters has not been placed in the air purifier or a filter is not placed properly. Make sure that all filters are properly installed in the following order, starting with the innermost filter: 1) NanoProtect filter HEPA Series 3 (FY5185); 2) NanoProtect filter Active Carbon (FY5182); 3) pre-filter. • The air quality sensor is wet. Make sure that the air quality sensor is clean and dry (see chapter "Cleaning"). The air purifier produces a unpleasant smell. • The first few times you use the appliance, it may produce a plastic smell. This is normal. However, if the appliance produces a burnt smell, contact your Philips dealer or an authorized Philips service center. The filter may produce smell after being used for a while because of the absorption of indoor air. Remove the filter and place it where it has direct sunlight and ventilation for several hours. Re-install and try using it again. If the odor remains, please replace the filter. The air purifier is loud. • If the air purifier is too loud, change the fan speed to a lower fan speed level. When using the air purifier in a bedroom at night, choose the sleep mode.

indicates that I need to replace a filter, but I already did. • Perhaps you did not reset the filter lifetime counter. Plug in the air purifier, touch to switch on the air purifier, and touch and hold the reset button for 3 seconds (see Filter reset section). Error code "E1" displays on the screeen. • The motor has malfunctions. Contact the Consumer Care Center in your country. Error codes "E2", "E3", "E4" or "E5" displays on the screen. • The sensor has malfunctions. Contact the Consumer Care Center in your country. Which App I should download? • Download and install the Philips "Clean Home+" app from the App Store or Google Play. The Wi-Fi setup is not successful. • If the router your purifier is connected to is dual-band and currently it is not connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair your purifier again. 5GHz networks are not supported. • Web authentication networks are not supported. • Check if the purifier is within range of the Wi-Fi router. You can try to locate the air purifier closer to the Wi-Fi router. • Check if the network name is correct. The network name is case-sensitive. • Check if the Wi-Fi password is correct. The password is case-sensitive. • Retry the setup with the instructions in section ‘Set up the Wi-Fi connection when the network has changed’. • The Wi-Fi connectivity can be interrupted by electromagnetic or other interferences. Keep the appliance away from other electronic devices that may cause interferences. • Check if the mobile device is in airplane mode. Make sure to have the airplane mode deactivated when connecting to the Wi-Fi network. • Consult the help section in the App for extensive and up- to-date troubleshooting tips.

service If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Center in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer. Order parts or accessories If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www.philips.com/ support. If you have problems obtaining the parts, please contact the Philips Consumer Care Center in your country (you can find its phone number in the worldwide guarantee leaflet). 10 Notices Electromagnetic fields (EMF) This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields. Compliance with EMF Koninklijke Philips N.V. manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips' leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products.

the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. Follow your country's rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health. Notice App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. This Philips appliance and Clean Home+ app applied multiple open source softwares, Copies of open source software license text used in this product can be derived from website- www.philips.com/cleanhome.

22 控制項目概要 (圖 b) 22 3 快速入門 23 安裝濾網 23 Wi-Fi 連線 23 4 使用空氣清淨機 24 瞭解空氣品質指示燈 24 開關機 25 變更自動模式設定 25 變更風速 26 使用開/關燈按鈕 26 切換顯示指示燈 26 設定兒童鎖 26 5 清潔 27 清潔空氣清淨機的機體 27 清潔空氣出風口護蓋 27 清潔空氣品質感測器 27 清潔前層濾網 27 6 更換濾網 28 濾網更換指示器 28 更換濾網 28 濾網重設 29 7 收納 29 8 疑難排解 30 9 保固與服務 32 訂購零件或配件 32 10 聲明 32 電磁場 (EMF) 32 回收 32 注意 33 使用環保紙張。感謝您為守護樹木貢獻一份心力。 all-guides.c om

• 請勿用水、其他液體，或是 (易燃) 清潔劑清潔產品，以 避免觸電和 / 或火災。 • 請勿在產品周圍噴灑殺蟲劑 或芳香劑等任何易燃物質。 警告 • 在您連接電源之前，請檢查 本地的電源電壓是否與產品 所示的電壓相符。 • 如果電源線損壞，您必須將 其交由飛利浦、飛利浦授權 之服務中心，或是具備相同 資格的技師進行更換，以免 發生危險。 • 當插頭、電源線或產品本身 受損時，請勿使用本產品。 • 本產品可供 8 歲以上孩童、 身體官能或心智能力退化 者，或是經驗與使用知識缺 乏者使用，但需要有人在旁 監督或適當指示如何安全使 用本產品，以及可能遭受的 危險。請勿讓孩童把玩本產 品。若無人在旁監督，不得 讓孩童清潔與維護本產品。 • 請勿在出風口上方或進風口 前面放置物品，擋住進出風 口。 • 確定沒有異物透過出風口掉 入產品。 • 2.4 GHz 802.11b/g/n 標準 WiFi 介面，最大輸出功率為 31.62 mW EIRP。 注意 • 本產品不可用來作為維持良 好通風的設備、替代吸塵器 清潔，或烹調時用來當作抽 油煙機使用。 • 如果供應產品電力的電源插 座接頭不良，產品插頭會發 熱。請確定將產品插入接頭 良好的插座。 • 請將本產品放置在乾燥平穩 的水平面上使用。 • 產品的背面及側面須至少保 留 20 公分的間隔距離，頂 部則至少保留 30 公分的間 隔距離。 • 產品頂部請勿放置任何 物品。

別是進風口及出風口)。 • 請勿將手指或物體插入出風 口或進風口，以避免身體受 傷或損壞產品。 • 當您使用室內噴霧式驅蟲劑 或在充滿油漬、燒香、香 煙的火星或化學煙霧的地方 時，請勿使用本產品。 • 請勿在氣體用品、加熱裝置 或壁爐附近使用本產品。 • 使用完畢後，以及在進行清 潔或其他維修或更換濾網之 前，請務必先拔除產品的電 源插頭。 • 請勿在溫差變化極大的室內 使用本產品，因為室溫差距 太大會造成本產品內部凝結 水珠。 • 請將本產品遠離使用無線電 電波的電器至少 2 公尺以避 免干擾，例如電視、無線電 廣播、無線電信號控制的 時鐘。 • 本產品為家用產品，僅限於 在正常操作環境下使用。 • 請勿在極為潮濕或周遭溫度 很高的環境下使用本產品， 例如浴室、廁所或廚房。 • 本產品無法清除一氧化碳 (CO) 或氡氣 (Rn)。發生燃 燒意外及危險化學物品意外 時，本產品無法當作安全裝 置使用。 • 若您需要搬動產品，請先切 斷產品電源供應。 • 請勿以拉動電源線的方式移 動本產品。 • 更換濾網後請務必清潔 雙手。

控制按鈕 I 電源開/關按鈕 J 開/關燈按鈕 K 自動模式按鈕 L 風速按鈕 M 兒童鎖按鈕 N 重設按鈕 顯示面板： 睡眠模式 速度 1 速度 2 速度 3 超高速 濾網更換警示 前層濾網清潔警示 Wi-Fi 指示燈 氣體指示燈 PM2.5 指示燈 過敏原指數指示燈 一般模式 過敏原模式 細菌與病毒模式 兒童鎖指示燈 2 您的空氣清淨機 感謝您購買本產品。歡迎來到飛利浦的 世界！ 請至 www.philips.com/welcome 註冊您 的產品，以獲得飛利浦提供的完整支援。 產品概要 (圖 a) A 控制按鈕 B 空氣出風口護蓋 C 空氣品質感測器 D 顯示面板 E 納米級防護HEPA S3型濾網 (FY5185) F 納米級防護活性碳濾網 (FY5182) G 前層濾網 H 側邊護蓋

1 前往App Store 或 Google Play 下載並安裝 Philips「Clean Home+」 應用程式。 2 將空氣清淨機的插頭插入電源插座，然 後按下 以開啟空氣清淨機。 » 第一次使用時，Wi-Fi 指示燈 會閃爍橘光。 3 請確定智慧型手機或平板裝置已成功連 線至您的 Wi-Fi 網路。 4 啟動「Clean Home+」應用程式並按 一下「連接新裝置」或按下畫面上方的 「+」按鈕。依照螢幕指示將空氣清淨 機連接至您的網路。 5 成功配對和連線後，Wi-Fi 指示燈 會亮起白光。如果配對不成功，請參閱 疑難排解部分，或「Clean Home+」 應用程式的說明部分，以深入掌握最新 的疑難排解秘訣。 備註 • 此說明僅在第一次設定空氣清淨機時才適 用。如果網路已變更或需要再次執行設 定，請參閱第 24 頁的「重設 Wi-Fi 連 線」部分。 • 如要將一台以上的空氣清淨機連線到智慧 型手機或平板裝置，必須逐一設定。請先 完成一台空氣清淨機的設定後，再開啟其 他空氣清淨機。 • 務請確定您的智慧型手機或平板裝置與空 氣清淨機之間的距離少於 10 公尺，且沒 有任何阻礙物。 • 本應用程式支援最新版 Android 和 iOS。 請至 www.philips.com/cleanhome 查看最新更新的支援作業系統和 裝置。 3 快速入門 安裝濾網 備註 • 本產品的兩側都有一組濾網。每邊配備一 個前層濾網和一個空氣淨化濾網。 • 務必先安裝空氣淨化濾網，再裝前層 濾網。 • 安裝濾網時，請確認有拉片的一側朝向 自己。 1 拉出側面護板的頂部，將它從空氣清淨 機中取出 (圖 c)。 2 按壓兩個固定夾 (1)，再朝自己的方向 拉出前層濾網 (2) (圖 d)。 3 取出所有濾網 (圖 e)。 4 拆下濾網的所有包裝材料 (圖 f)。 5 將較厚的濾網 (FY5185) 裝至空氣清淨 機，然後裝上較薄的 AC 濾網 (FY5182) 每個濾網皆會顯示型號 (圖 g)。 6 將前層濾網裝回空氣清淨機 (圖 h)。 備註 • 請確認具兩個固定夾的一側朝向自己， 且前層濾網的所有扣鉤皆已正確裝入清 淨機。 7 重新裝入正面護板，請先將護板頂部壓 入空氣清淨機頂部 (1)。接著，輕輕將護 板輕推入空氣清淨機機體 (2) (圖 i)。 8 重複上述步驟，安裝空氣清淨機另一側 的濾網。 9 裝好濾網後，請徹底清潔雙手。

備註 • 這適用於空氣清淨機連線的預設網路已變 更時。 • 在預設網路已變更時重設 Wi-Fi 連線。 1 將空氣清淨機的插頭插入電源插座，然 後按下 以開啟空氣清淨機。 2 同時按下 和 3 秒鐘，直到聽到 嗶聲。 » 此時空氣清淨機會進入配對模式。 » Wi-Fi 指示燈 會閃爍橘光。 3 請依照「第一次設定 Wi-Fi 連線」部 分的步驟 4-5 進行。 4 使用空氣清淨機 瞭解空氣品質指示燈 IAI 為即時的數字顯示，對室內過敏原等級 提供立即可見的回饋資訊。 IAI 空氣品質指示 燈顏色 空氣品質等級 1-3 藍色 很棒 4-6 藍色 - 紫色 普通 7-9 紫色 - 紅色 不良 10-12 紅色 非常不良 空氣清淨機電源開啟後，空氣品質指示燈 會自動亮起，並依序閃爍所有燈色。在約 30 秒後，空氣品質感測器會選擇符合周遭 空氣粒子品質的相應顏色。 IAI 專業級的 AeraSense 感測器能偵測到室內 空氣過敏原的等級，並提供 1 到 12 的數據 回饋資訊，顯示室內空氣過敏原的潛在危 險等級。1 表示空氣品質最佳。 氣體 配備進階氣體感測器，範圍從 L1 到 L4 的顯 示器會顯示偵測到的潛在有害氣體密度等級 (包括 揮發性有機物 (VOC)、異味等)。L1 表 示空氣品質最佳。 all-guides.c om

» 螢幕上會顯示自動 ( ) 和 。 一般模式 此智慧型自動設定可將空氣清淨機的設定 自動調整至最適合的程度。 • 按下自動模式按鈕 以選擇一般模式 (圖 m)。 » 螢幕上會顯示自動 ( ) 和 。 細菌和病毒模式 細菌和病毒模式可增強風量，以快速減少 細菌和病毒。 • 按下自動模式按鈕 以選擇細菌與病 毒模式 (圖 n)。 » 螢幕上會顯示自動 ( ) 和 。 開關機 備註 • 請務必將空氣清淨機放在平穩的水平表面 上，產品正面背對牆壁或家具。 • 為達最佳淨化效能，請關閉門窗。 • 進風口或出風口需遠離窗簾。 1 將空氣清淨機的插頭插入電源插座。 » 空氣清淨機會發出嗶聲。 » 所有燈號亮一次後，再次熄滅。 2 按下 以開啟空氣清淨機的電源 (圖 j)。 » 空氣清淨機預設為以過敏原模式 運作。 » 空氣清淨機正在暖機時，螢幕上 會顯示「 」。在僅測量空氣中 的懸浮微粒後，空氣清淨機會顯示 IAI 等級，並以自動模式運作， 會顯示在螢幕上 (圖 k)。 » 30 秒後，空氣清淨機螢幕會顯示 IAI 等級。空氣品質感測器會自動 選擇適當的空氣品質指示燈顏色。 3 按住 3 秒鐘即可關閉空氣清淨機的 電源。 備註 • 如果空氣清淨機在關閉之後保持連接至電 源插座，則當空氣清淨機再次開啟時，會 以先前的設定運作。

» 螢幕上會顯示「」。 » 超高速指示燈 會亮起。 使用開/關燈按鈕 透過開/關燈按鈕，就能視需要開啟或關 閉空氣品質指示燈、顯示螢幕及功能指示 燈。 1 按一下開/關燈按鈕 ，空氣品質指示 燈隨即變暗。 2 再按一下開/關燈按鈕 ，空氣品質指 示燈隨即熄滅。 3 三度按下開/關燈按鈕 ，所有指示燈 即會再次亮起。 切換顯示指示燈 本空氣清淨機有三種顯示指示燈：IAI 指 數、PM2.5 指數及氣體等級。 備註 • 空氣清淨機預設以 IAI 指數運作。 1 按下開/關燈按鈕 3 秒鐘，以切換至 PM2.5 顯示模式 (圖 r)。 » 螢幕會顯示 PM2.5 等級。 2 再次按下開/關燈按鈕 3 秒鐘，以切 換回到 IAI 顯示模式 (圖 s)。 » 螢幕上會顯示 IAI 指示燈和實際 IAI 指數。 3 再次按下開/關燈按鈕 3 秒鐘可切換 至氣體等級顯示幕 (圖 t)。 » 螢幕上會顯示氣體指示燈及實際氣 體等級畫面。 備註 • 即使 PM2.5 指數非常低，空氣品質指示 燈有可能仍會顯示紅色。此為正常現象。 這是因為至少其中一個指數 (IAI 指數或氣 體等級) 過高，導致空氣品質指示燈轉為 紅色。本產品會即時顯示空氣品質，並說 明可能性最高的風險。 設定兒童鎖 1 按住保護鎖按鈕 3 秒鐘，可啟動保 護鎖 (圖 u)。 » 螢幕會顯示兒童鎖圖示 。 » 兒童鎖啟用時，所有其他按鈕都不 會有反應。 2 再次按住兒童鎖按鈕 3 秒，即可停 用兒童鎖。 » 兒童鎖圖示 會消失。 備註 • 即使保護鎖已啟動，您仍可透過應用程式 控制本產品。

3 打開空氣品質感測器的護蓋 (圖 z)。 4 請使用溼棉棒清潔空氣品質感測器、 覆有灰塵的進風口和出風口 (圖 {)。 5 使用乾棉棒擦乾所有零件。 6 重新裝上空氣品質感測器的護蓋 (圖 |)。 清潔前層濾網 螢幕上顯示 F0 且前層濾網清潔指示燈 (圖 }) 亮起時，請清潔前層濾網。 1 關閉空氣清淨機的電源，從電源插座拔 掉插頭。 2 拉出正面護板的底部，將它從空氣清淨 機中取出 (圖 c)。 3 按壓兩個固定夾 (1)，再朝自己的方向 拉出前層濾網 (2) (圖 d)。 4 如果前層濾網很髒，請使用軟刷來清除 灰塵。接著，以流動的自來水清洗前層 濾網 (圖 ~)。 5 先確保前層濾網徹底風乾後，再放回空 氣清淨機。 6 將前層濾網裝回空氣清淨機 (圖 h)。 5 清潔 備註 • 清潔前請務必關閉空氣清淨機電源，並從 電源插座拔掉插頭。 • 切勿讓空氣清淨機浸入水或其他液體中。 • 切勿使用漂白劑或酒精等具磨蝕性、刺 激性或易燃洗劑清潔空氣清淨機的任何 部分。 • 只有前層濾網可水洗。空氣濾網皆不得 水洗。 • 請勿試圖以吸塵器清理濾網或空氣品質感 測器。 清潔空氣清淨機的機體 定期清潔空氣清淨機的內部與外殼，可避 免累積灰塵。 1 使用柔軟乾布清潔空氣清淨機的 內外部。 2 出風口亦可使用柔軟乾布清潔。 清潔空氣出風口護蓋 1 若要鬆開空氣出風口護蓋，握住護蓋上 的握把，將護蓋向上拉 (圖 v)。 2 用軟刷清潔護蓋 (圖 w)。 3 若要裝回蓋子，將其先裝入產品頂部， 然後使用握把朝產品的方向按壓側邊 (圖 x).。 清潔空氣品質感測器 每兩個月清潔空氣品質感測器，使產品發 揮最佳功效。如果在佈滿灰塵的環境中使 用產品，就要更常進行清潔。

C7，且濾網更換警示 燈 會亮起 更換兩個濾網 備註 • 為使前層濾網壽命最佳化，清潔後請確認 濾網完全風乾。 • 裝卸濾網後請洗手。 • 請確認具兩個固定夾的一側朝向自己，且 前層濾網的所有扣鉤皆已正確裝入空氣清 淨機。 7 若要重新裝入正面護板，請先將護板 頂部壓入空氣清淨機頂部 (1)。接著， 輕輕將護板輕推入空氣清淨機機體 (2) (圖 i)。 8 將空氣清淨機的插頭插入電源插座。 9 按下 按鈕以開啟產品電源。 10 按住重設按鈕 3 秒以重設前層濾網 清潔時間。 11 裝好濾網後，請徹底清潔雙手。

4 將新濾網裝至空氣清淨機 (圖 g)。 5 將空氣清淨機的插頭插入電源插座。 6 按住重設按鈕 3 秒鐘，可重設濾網 使用壽命計數器。 備註 • 更換濾網後請清洗雙手。 • 此空氣清淨機沒有其他使用者可自行維修 的零件。如需協助，請聯絡您所在國家/ 地區的客戶服務中心。 濾網重設 即使螢幕未顯示濾網更換代碼，您仍可以 更換濾網。更換濾網後，您需要手動重設 濾網使用壽命計數器。 1 同時按下 和 3 秒鐘，可進入濾 網重設模式 (圖 €)。 » 螢幕會顯示納米級防護HEPA S3型 濾網的代碼 (A3)。 2 按住 3 秒鐘，可強制重設納米級防 護HEPA S3型濾網的濾網使用壽命計 數器 (圖 )。 3 在重設納米級防護HEPA S3型濾網的 使用壽命計數器後，螢幕會顯示納米級 防護活性碳濾網的代碼 (C7) (圖 ‚)。 4 按住 3 秒鐘，可強制重設納米級防 護活性碳濾網的使用壽命計數器，並退 出濾網重設模式 (圖 f)。 7 收納 1 關閉空氣清淨機的電源，從電源插座拔 掉插頭。 2 清潔空氣清淨機、空氣品質感測器和前 層濾網 (參閱「清潔」單元)。 3 收納之前，請確保所有零件徹底風乾。 4 將濾網和前層濾網分別包在氣密塑膠 袋中。 5 將空氣清淨機、濾網和前層濾網存放在 涼爽乾燥處。 6 接觸過濾網後，請務必徹底清洗雙手。 all-guides.c om

性碳濾網 (FY5182)；3) 前層濾網。 • 空氣品質感測器潮溼。請確認空氣品質感測器乾淨且乾燥 (參閱 「清潔」單元)。 空氣品質指示燈的顏 色一直維持不變。 • 空氣品質感測器髒污。清潔空氣品質感測器 (參閱「清潔」 單元)。 空氣清淨機產生 異味。 • 使用本產品的前幾分鐘，可能會產生塑膠味。這是正常現象。 然而，產品如果產生燒焦味，請聯絡飛利浦經銷商或飛利浦授 權之服務中心。濾網使用一段時間之後，可能會因為吸收室內 氣體而產生異味。取出濾網，放在陽光直射且通風良好處數小 時。重新安裝，並嘗試再次使用產品。若仍會有味道，請更換 濾網。 空氣清淨機聲音 過大。 • 如果空氣清淨機聲音過大，可將風速變更為較低的速度等級。 夜間於臥室使用空氣清淨機時，請選擇睡眠模式。 空氣清淨機不斷要求 更換濾網，但濾網已 經更換了。 • 您或許未重設濾網壽命計數器。將空氣清淨機插上電源，按下 開啟空氣清淨機的電源，然後按住重設按鈕 3 秒鐘 (參 閱「濾網強制重設」一節)。 螢幕顯示「E1」錯誤 代碼。 • 產品馬達故障。請聯絡您所在國家/地區的客戶服務中心。 螢幕顯示錯誤代碼 「E2」、「E3」、 「E4」或「E5」。 • 產品傳感器故障。請聯絡您所在國家/地區的客戶服務中心。

Home+」應用程式。 Wi-Fi 設定不成功。 • 如果清淨機連接的路由器為雙波段，且目前並未連接至 2.4GHz 網路，請切換到相同路由器的另一個波段 (2.4GHz) 並嘗試再次 配對您的清淨機。不支援 5GHz 網路。 • 不支援 Web 認證網路。 • 檢查清淨機是否位於 Wi-Fi 路由器的範圍內。您可以嘗試將空 氣清淨機移近 Wi-Fi 路由器。 • 檢查網路名稱是否正確。網路名稱需區分大小寫。 • 檢查 Wi-Fi 密碼是否正確。密碼需區分大小寫。 • 請依照「在網路已變更時設定 Wi-Fi 連線」一節中的指示，重 試設定。 • Wi-Fi 連線可能受到電磁干擾或其他干擾而中斷。請讓本產品 盡量遠離可能造成干擾的其他電子裝置。 • 檢查行動裝置是否處於飛航模式。連接至 Wi-Fi 網路時，請務 必先停用飛航模式。 • 請參閱應用程式的說明章節，以深入掌握最新的疑難排解 秘訣。

Koninklijke Philips N.V. 製造銷售多項消費 性產品，這些產品就如同其他電器，通常 能收發電磁訊號。 飛利浦的一大企業原則，就是針對自身的 產品進行必要的健康與安全檢測，以符合 所有適用的法律規定，以及在產品生產期 間符合適用的 EMF 標準。 飛利浦致力於開發、生產及銷售不危害健 康的產品。飛利浦保證，只要依照正確用 途並妥善使用，根據現有的科學研究資 料，使用本公司產品並無安全顧慮。 飛利浦積極參與國際 EMF 與安全標準的開 發，因此得以掌握標準化的發展，及早將 標準化與自身的產品整合。 回收 本產品使用壽命結束時，請勿與一般家庭 廢棄物一併丟棄。請將該產品送至政府指 定的回收點進行回收。此舉能為環保盡一 份心力。 請遵循您所在國家/地區對電氣與電子產品 分類收集的規定。正確處理廢棄產品有助 於避免對環境和人類健康帶來負面影響。 9 保固與服務 若您需要相關資訊，或是有任何問題，請 造訪飛利浦網站：www.philips.com，或聯 絡您所在國家/地區的飛利浦客戶服務中心 (您可在全球保證書上找到電話號碼)。若當 地沒有客戶服務中心，請洽詢當地的飛利 浦經銷商。 訂購零件或配件 如果您必須更換零件或想購買其他零件， 請聯絡您的飛利浦經銷商，或造訪 www.philips.com/support。 如果您有取得零件方面的問題，請聯絡您 所在國家/地區的飛利浦客戶服務中心 (您 可在全球保證書上找到電話號碼)。

Google Play 是 Google Inc 的商標。 本飛利浦產品與 Clean Home+ 應用程式 含有多個開放原始碼軟體，本產品使用的 開放原始碼軟體授權文本副本可於此網站 取得：www.philips.com/cleanhome。

chromium Polybrominated biphenyls Polybrominated diphenyl ethers 鎘 (Cd) 六價鉻 (Cr+6) 多溴聯苯 (PBB) 多溴二苯醚 (PBDE) 限用物質及其化學符號 Restricted substances and its chemical symbols 氣體傳感器 傳感器電源轉接板 主電路板組件 電源電路板 馬達組件 - - - - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ 設備名稱：飛利浦空氣清淨機， 型號（型式）：AC5659 Equipment name Type designation (Type) 備考1：“超出0.1 wt %”及“超出0.01 wt %”係指限用物質之百分比含量超出百分比 含量基準值。 備考2：“○”係指該項限用物質之百分比含量未超出百分比含量基準值。 備考3：“－”係指該項限用物質為排除項目。 Note 1 : “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. Note 2 : “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. Note 3 : The “－” indicates that the restricted substance corresponds to the exemption. all-guides.c om