Penguin Computing Arctica 3200xlp Series Installation Manual

1 Arctica 3200xlp Series switch Installation Guide Version 1.1 2017-02-07 ...

2 Content 1. Introduction ................................................................................................ 1 1.1.Product Brief ...................................................................................................... 1 1.1.1.Overview ................................................................................................... 1 1.1.2.Features and Bene ...

3 3.2.7.AC Power Supply Connection ................................................................ 7 3.2.8.Earthing Cable Connection ..................................................................... 8 3.2.9.Checking the Switch ................................................................................ 9 ...

1 1. Introduction 1.1.Product Brief 1.1.1.Overview Arctica 3200xlp switch is the next generation of 40Gb Ethernet routing switches. Arctica 3200xlp switch is based on 40Gb switching technology. It is particularly designed for 40Gb server of data center to fetch in the scene in high consistency. It provides the cogent network sustentation for 40Gb/10Gb connecting to 40Gb/10Gb scheme ...

2 split into 4 10Gb SFP+ ports. ◇ Support 40Gb Ethernet 40Gb Ethernet which adopts full-duplex technology instead of low-speed, half-duplex CSMA/CD protocol, is a big leap in the evolution of Ethernet. 40Gb Ethernet can be deployed in star or ring topologies. With 40Gb Ethernet, Arctica 3200xlp switch provide broad bandwidth and powerful processing capacity. It is suitable for met ...

3 administrator abide by SMTP protocol. Arctica 3200xlp supports SSH protocol, ensure the configuration management security of the switch. It is adopted the web management system ‘LinkManager’ for unified management expediently and compactly. ◇ MPLS Ready Arctica 3200xlp supports MPLS VPN which be used to metropolitan area network and wide area network and processes the hardwa ...

4 and telnet configuration through this port. The console port supports asynchronous mode, set the data bit as 8, the stop bit as 1, the parity bit as none, the default baud rate as 115200bps. 1.2.2.Back Panel The back panel of Arctica 3200xlp includes 2 alternating current of 220V power module (it provides redundancy backups) and 5 fan rabbets. Fig 1-3 Back panel of Arctica 3200xlp ...

5 Table 1-4 The explanation of the port indicator light Indicator light Panel sign State ETHERNET port Link light (left) Green light Wink The port is transmitting data. Put out There is no data transmitting on port. ETHERNET port Activity light (right) Yellow light always on The port is configured at 10M/100M speed Green light always on The port is configured at 1000M speed Put out ...

6 Arctica 3200xlp provides 32 QSFP+ ports and supports the QSFP+ cable. It enhances the flexibility of the network. User can select the cables in the table 1-5 according to the demand. Table 1-6 Cables supported by Arctica 3200xlp Type Manufacturer Model Standard 40G QSFP+ Cable Tyco 2053638-3 30AWG, 3.0m QSFP+ to 4Xsfp+ Cable Amphenol 582410007 30AWG, 3.0m QSFP to QSFP Cable Molex ...

7 +/- 5%. There is a fan and a handle for sticking in or pulling out the module on the back of the power supply. The power supply module supports the hot plug. 1.5.2.550W Power Module Arctica 3200xlp switch also can have two 550W power modules in standard configuration, it provides redundancy backups. It only provides airflow front to back mode. The maximum power is 550W, the import ...

8 Caution！ Different airflow fan modules can not be mix used. Power modules’ airflow must be same with fan modules’. 1.7.System Specifications Table 1-7 System Specifications of Arctica 3200xlp Type Attribute Arctica 3200xlp Dimension(W * H * D) (mm) 433.8 * 44 * 550 Weight 10.172 kg Fixed Port 32 QSFP+ ports Management Port 1 RJ-45 serial console port Power ...

1 2. Installation Notice To ensure the proper operation of Arctica 3200xlp and your physical security, please read carefully the following installation guide. 2.1.Environmental Requirements ■ The switch must be installed in a clean area. Otherwise, the switch may be damaged by electrostatic adherence. ■ Maintain the temperature@airflow front to back within 0 to 45 °C, temper ...

2 Gas Average (mg/m³) Max (mg/m³) SO2 0.2 1.5 H2S 0.006 0.03 NO2 0.04 0.15 NH3 0.05 0.15 Cl2 0.01 0.3 Table 2-2 Environmental Requirements: Particles 2.1.2.Temperature and Humidity Although the switch is designed to use 5 fans, the site should still maintain a desirable temperature and humidity. High-humidity conditions can cause electrical resistance degradation or even electr ...

3 15 ~ 30°C 0 ~ 40°C 40 ~ 65% 10 ~ 90% Table 2-3 Environmental Requirements: Temperature and Humidity Caution! A sample of ambient temperature and humidity should be taken at 1.5m above the floor and 0.4m in front of the switch rack, with no protective panel covering the front and rear of the rack. Short term working conditions refer to a maximum of 48 hours of continued operat ...

4 All sources of interference, whether from the device/system itself or the outside environment, will affect operations in various ways, such as capacitive coupling, inductive coupling, electromagnetic radiation, common impedance (including the grounding system) and cables/lines (power cables, signal lines, and output lines). The following should be noted: ■ Precautions should ...

5 2.3.Security Warnings ■ When using QSFP transceiver, do not stare directly at the fiber bore when the switch is in operation. Otherwise the laser may hurt your eyes. ■ Do not attempt to conduct the operations which can damage the switch or which can cause physical injury. ■ Do not install, move or disclose the switch and its modules when the switch is in operation. ■ Do ...

1 3. Device Installation 3.1.Installation Preparation 3.1.1.Verify the Package Contents Please unpack the shipping package and verify carefully the contents inside. 3.1.2.Required Tools and Utilities The required tools and utilities are shown below: ■ Cross screwdrivers ■ Flat-blade screwdriver ■ ESD wrist strap ■ Antistatic uniform Caution! Users should prepare the require ...

2 1. Attach the 2 brackets on the Arctica 3200xlp with screws provided in the accessory kit. 2. Put the machine on the stock of the rack when installing because the machine is quite heavy. 3. Put the bracket-mounted switch smoothly into a standard 19’’ rack. Fasten the Arctica 3200xlp to the rack with the screws provided. Leave enough space around the switch for good air circul ...

3 Figure 3-3 The figure of Arctica 3200xlp switch power supply installing Please install the power supply module according to the following approach: 1. The golden finger is entad and aim at the power supply rabbet of the machine to insert to the end downwards. You can hear the lock sound of “click”. 2. Force the board on the side of AC cable bore to the direction of fan when t ...

4 Figure 3-4 The figure of Arctica 3200xlp switch installing the fan Please install the fan module according to the following approach: 1. The golden finger is inward and adown and aim at the fan rabbet of the back machine flatly to the end. You can hear the lock sound of “click”. 2. Pinch the sheet metal inward and draw the fan module forth when taking out it. Caution! The she ...