Patrol Hawk 2AKOIPHGW Operation & User’s Manual

Please keep well of the user manual for further reference. Please get around understanding of this manual for properly operation. FCC ID: 2AKOIPHGW FCC ID: 2AKOIPH818HW FCC ID: 2AKOIPH818MC FCC ID: 2AKOIPH818YK N OT E : T h i s e q u i p m e n t h a s b e e n t e s t e d a n d fo u n d t o c o m p l y w i t h t h e l i m i t s fo r a C l a s s B d i g i t a l d e v ...

network to transmit alarm message. It pushes the alarm message to users' smart phone App when alarming. Meanwhile, it’s able to send SMS and make phone calls. By using dual network, it is more stable, safer and faster. Also users could remote control the alarm panel and open IP camera monitoring on site. For more convenient using, please foll ...

2 1.1 Kit A SOS Alarm Panel*1 PIR Detector*1 Door Sensor*1 Remote Controller*2 Other accessories: Power adapter*1,alarm panel mounting bracket*1,PIR mounting bracket*1 door sensor double-sided adhesive*1,user manual*1. Notice: The version is dual network of . WiFi+3G/2G ...

2.1 Alarm Panel and Sensors 2.2 Insert SIM Card 2.3 Plug Power & Turn On System 2.1.1 Control Panel:Front 2.1.2 Control Panel:Back Listen in MIC Siren(80db) SIM Socket Wired zone terminal Temperature and humidity sensor probe terminal WiFi Setting Button Record MIC Tamper switch Wireless signal indicator 3G/2G signal indicator Power indicator Record button Power port Power Port Power switch Power Switch Speaker Alarm Indicator(Re ...

3.1 APP Download and Installation 3.2 Add Users Scan the QR code, download APP to your smart mobile system (iOS or Android System) and install it. Adding APP to your mobile, it allows 1 householder, 99 users. First, add 1 user as householder, please do it as following steps. 3.2.1 QR Code 1. Click to open APP on your mobile 2.After the welcome interface, then entry into emergency call interface, click ” > “ on the right side ...

Management interface. 4. Send invite code by SMS to the family members you want to add them in. 5. Open your family member’s phone, then enter the main interface, click "Devices" 7. Enter the received invitation code. 8. Enter your mobile phone number. 9. Enter user name, for example”Jason” 10. Click "Acception". 11. Complete, Click "Finish". 6. After entering adding users interface, click on the "Users". 2. Click ...

Gas Leakage Alert Emergency Call Alert Medical Call Alert Detectors Alert Door/Window Sensor disconnect Door/Window Closed PIR Detector Low Battery Low Battery Alert Low Battery Alert PIR Detector Disconnected Smoke Detector Disconnected Water Sensor Disconnected Gas Detector Disconnected Emergency Button Disconnected Medical Call Button Disconnected Detectors Disconn ...

1.Click to enter into the interface of adding door/window sensor. 1. Click into SMS and phone call numbers setting interface. 4. Click ok, App will automatically recognize the door/window sensor. 2. Click the scan detection. 2. Click to set numbers, can setup 3 SMS and 3 phone call numbers. 5. Adding successfully. 3. Scan QR code on the back of the sensors. 3. After setting phone numbers, click “ok” to finish ...

4.4.9 odify Zone Name M 4.4.10 Check Sensors’ Status 2 2 4 1. Enter into sensor management interface, click the icon of home stay arm. 1. Click related host to get into users management interface. 1. Enter into sensor management interface, choose the zone. 1. Click into sensor management interface,choose the zone. 2. In pop up window, switch to OFF status and confirm. 2.Click related icons to check alarm messages. Clic ...

1. If choose GSM/CDMA network (with GSM/CDMA SIM card insert),the system will push alarm information to Vcare APP, and it will also send SMS and make phone call to preset mobile numbers. If don’t choose GSM/WCDMA network, it will neither send SMS text message nor make calls when alarming. If choose “smart mode”, alarm host will send SMS and make phone call to preset phone numbers in the situation of WiFi network break ...

6.1 Arm/Disarm/Home Stay Arm 1. Click “Arm Status”, get into “Arm/Disarm” management interface. 2. Arm/Disarm management interface. ARM: After arming, once trigger the sensor will activate alarm. Home Stay Arm: Only those sensors set to home stay armed mode will be triggered to alarm. Disarmed: After disarmed, all intrusion type sensors will not alarm, only panic button, gas sensor, smoke detector will be activate to alarm. S ...

6.4 FAQ about IP Camera 1. Q: When adding a device, APP did not prompt the discovery of a new equipment. A: Please check if the camera and cell phone are in the same LAN; Please check if the camera’s network indicator keeps on; If camera and cell phone are not in the same LAN, it is recommended to use the ID number manually add camera. 2. Q: When viewing live video, the device reminds the password is wrong. A: Please chec ...