Panasonic aw-he40 series Manual 

output it. Also, it can superimpose the audio onto SDI output through AW-HS50 switcher. To allow the audio to pass through, both AW-HE40 camera and AW-HS50 switcher require changing the settings. 1．AW-HE40 Audio Settings (Example 1) Using AW-RP50 ...

(Figure 2: AW-HE40 On-Screen Menu) Equalizer: Setting for the equalizer function * Default: Off ・Off: Equalizer function is disabled. ・Low Cut: Low frequencies are cut to reduce noise levels of air conditioning units, projectors or other equipment. ・Speech Enhancement: Low and high frequencies are cut to enhance ...

① Start the Web screen. – (Figure 4) ② Follow the procedure below to enable the audio input from the device connected to the external input connector. Procedure: ［Setup］ ＞ ［Image/Audio］ ＞ ［Audio］ ＞ Audio ⇒ [On] * Default: Off * If the login screen is displayed, please enter the user name and pass ...

* In order that the audio superimposed on an SDI input signal is can pass through, the setting change below is required. ① Hold down OSD ON button – (Fig.5-A) for 2 seconds to open the menu. (Hold it down again for 2 seconds to close the menu.) ② Use OSD/TIME dial – (Fig.5-B) to set the settings for individual output signa ...