OXO Good Grips Mounting Instructions
Read Online
Read the OXO Good Grips Mounting Instructions online using the built-in PDF viewer.
Text of the manual
A
Mounting
Plate
F
CamLock™
Holders x4
G
Hooks x4
B
Aluminum
Rail
H
Screws x4
I
Drywall
Anchors x4
D
Inner Rail
Endcap
E
Outer Rail
Endcap
C
Support
Plate
INCLUDES
Determine a location for the organizer. Please
note that the aluminum rail (B) extends past the
mounting plate (A) so adequate clearance is
necessary.
B
A
Mark hole on the left side of mounting plate (A).
Level mounting plate using built-in level and mark
hole on the right side of mounting plate (A).
1
A
If not mounting directly into a stud, use drywall
anchors (I). TIP: Put a starter hole in the wall for
anchor to go in easily.
DRYWALL OPTION
I
x2
Line up mounting plate (A) with pencil marks.
Arrows on mounting plate should be in up
position. Fasten the mounting securely to wall
using screws (H) provided.
2
H
A
H
A
1
1
2
2
Attach aluminum rail (B) to mounting plate (A)
by hooking from top and pushing until it clicks
in place.
3
B
A
2” min
Slide outer rail (B) to desired length. Be sure to
maintain a minimum 2" overlap between the
inner and outer rails. Mark location on wall.
B
4
OVER
Fasten support plate (C) to mounting surface
using screws (H) provided. Slide aluminum rail
(B) back into place.
6
C
B
H
1”
Slide outer rail (B) back and insert support plate
(C) into outer rail (B). Support plate (C) must
be installed at least 1" from desired length.
C
B
B
5
If not mounting directly into a stud, use drywall
anchors (I). TIP: Put a starter hole in the wall
for anchor to go in easily.
DRYWALL OPTION
B
I
Slide CamLock™ holders (F) onto aluminum rail (B).
7
Side View
F x4
B
1
2
Hooks (G) attach from top of rail and snap into
place.
8
x4 G
Insert endcaps (D & E).
9
D
E
