Overland Storage SnapServer DX1 Add-on Instructions

Page 1 of 4 SnapServer™ DX1 Add-on/Spare DIMM Instructions This document describes how to add a second DIMM (Dual In-line Memory Module) or remove and replace an existing DIMM in a SnapServer DX1 from Overland Storage. WARNING: To reduce the risk of electric shock or damage to equipment, always re ...

Page 2 of 4 Add-on/Spare DIMM Instructions Remove the Bezel Carefully take hold of the front bezel and pull straight out from the appliance until the magnets release. Set it aside. Remove the Drives IMPORTANT: Overland recommends that you remove the drive assemblies to lessen the unit’s weight pri ...

Page 3 of 4 Add-on/Spare DIMM Instructions Install Additional DIMM NOTE: If just replacing SnapServer DIMMs, skip “Replace DIMMs.” 1. If the existing DIMM has 8 chips per side, remove it first: a. Press the side latches outward until it pops up. b. Grasp the DIMM on the sides and pull it out. Set ...

Page 4 of 4 http://support.overlandstorage.com You can get additional technical support on the Internet at the Overland Storage Support web page, or by contacting Overland Storage using the information found on the Contact Us page on our web site. Add-on/Spare DIMM Instructions Install Drives 1. Posi ...