Overland Storage SnapServer DX2 Replacement Instructions

Page 1 of 5 SnapServer™ DX2 Chassis Replacement Instructions IMPORTANT: These instructions are for a DX2 chassis with captive screws at the bottom of the side flanges. For units with the screws at the top of the flanges, refer to document 10400403-002. This document describes how to remove and replac ...

Page 2 of 5 Chassis Replacement Instructions Remove Unit from Rack WARNING: It is recommended that a mechanical lifter (or at least two people) be used during rack installation or removal to prevent injury. AVERTISSEMENT: Pour éviter toute blessure il est recommande qu'un monte-charge (ou deux person ...

Page 3 of 5 Chassis Replacement Instructions Move PCIe Cards All installed PCIe cards need to be moved to the new chassis: 1. For both chassis, release and lift the bracket lock. 2. If needed, remove any extra rear slot covers on the new chassis to match the old chassis slots that have cards. 3. Noting ...

Page 4 of 5 Chassis Replacement Instructions Reinstall the Drives 1. Position a drive carrier in front of its empty slot. 2. Slide the carrier in until the latch locks (clicks). 3. Repeat Steps 1–2 for all remaining drive carriers. IMPORTANT: To maintain proper airflow and cooling, a drive carrier or ...

Page 5 of 5 http://support.overlandstorage.com You can get additional technical support on the Internet at the Overland Storage Support web page, or by contacting Overland Storage using the information found on the Contact Us page on our web site. SDX2 Chassis Replacement Instructions Return Old Chassis ...