Optimum DRO 5 Operating Manual

Text of Optimum DRO 5 Operating Manual

M A S C H I N E N - G E R M A N Y
Dreiachs- Positionsanzeige Three-axes position display DRO 5 Artikel Nr. Item no. 3383975 Version 1.0.4 Betriebsanleitung - de Operating manual - en
M A S C H I N E N - G E R M A N Y
Version 1.0.4 dated 2015-11-19 Page 16 Original operating instructions DRO 5 GB Preface Dear customer, Thank you very much for purchasing a product made by OPTIMUM. OPTIMUM digital displays offer a maximum of quality, technically optimum solutions and convince by an outstanding price performance ratio. Continuous
M A S C H I N E N - G E R M A N Y
Version 1.0.4 dated 2015-11-19 Page 17 Original operating instructions DRO 5 GB 1.2 Intended use Combined with external sensors, the DRO5 electronic display represents a high-precision measuring sys- tem. The electronic display serves exclusively for processing and indicating position and rotational speed values.
M A S C H I N E N - G E R M A N Y
Version 1.0.4 dated 2015-11-19 Page 18 Original operating instructions DRO 5 GB 1.5 Basic safety information DANGER OF EXPLOSION! Do not use the electronic display in explosive zones. 2 Identification The type label shows the model name with model number and serial number. 2.1 Scope of delivery  Digital Positio
M A S C H I N E N - G E R M A N Y
Version 1.0.4 dated 2015-11-19 Page 19 Original operating instructions DRO 5 GB ATTENTION! Basically, all connections are protected against external interference. Choose a place of operation that excludes inductive or capacitive interference influences on the electronic display or its connecting lines. When mounti
M A S C H I N E N - G E R M A N Y
Version 1.0.4 dated 2015-11-19 Page 20 Original operating instructions DRO 5 GB 3.3 TTL differential signal 6-pin socket: (Metal outer ring) 4 Function  Display: three position display, one speed display  Counting resolution setting function  Counting direction setting  Linear error compensation  Me
M A S C H I N E N - G E R M A N Y
Version 1.0.4 dated 2015-11-19 Page 21 Original operating instructions DRO 5 GB 4.2 Operations 4.2.1 Axial function In the normal display state, press (X,Y, Z) key to make the corresponding axial value flash. After flash sev- eral times, this axis will be cleared. If the value of the indicator is blinking, press
M A S C H I N E N - G E R M A N Y
Version 1.0.4 dated 2015-11-19 Page 22 Original operating instructions DRO 5 GB Operation The introductions of the main functions. Save and Exit Saving new parameters, press the "PROG" key to confirm, then return to the normal display state. 5.1.1 LCD display parameter setting Contrast Press the "PROG" key to ente

Optimum Monitor Owners Instructions: