OKAYLIGHT PM90 Quick Start Manual
Text of OKAYLIGHT PM90 Quick Start Manual
3.Check the data
5.Battery replacement
6.Safe use
7.Specs and maintanence
8.Toubleshootings
1) set system time
2) connect to appliance
3) check the power data
4) Manually turn on/off switch
1) Turn on/off the back light
2) Currency select
3)
4)
Set local power tarrif
Set GHG(Green House Gas) coefficient
5) Countdown setting
6) Overload setting
1) Value button
2) Display button
4.History data
1) Check data fr
1. Set system time
Press and hold button SET
for 3 sec.
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
Press +/- button to
switch time system(12hr and 24hr)
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
Press OK to NEXT menu
Press +/- button to
set hour
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
Press HISTORY
2. Plug Pm90 into outlet, connect appliance to Pm90
Plug the Pm90 into outlet
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
3. Check the on-going data on PM90
connect appliance to Pm90
Briefly press VALUE button to
cycle switch the data displayed
Votage/Current/Wattage/
Max Current/Max Wattage
Frequency/Cos phi
4. Switch on/off the output
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
Press and hold VALUE button for
3 seconds to turn ON / OFF the switch
Hold!
1. Turn on/off back light
the button cell is designed to maintain the RTC(Real-Time-Clock) chipset inside the Pm90
Please note that back light consumes much more energy than RTC chipset itself, so we set a
switch to turn off the back light if back light is not necessary during cell power supply. Please
be advised that turning off the back light will expand battery life sharply.
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
VALUE/+
DISPLAY/-
SET
3. Set local power tarrif
You can use Pm90 easily to know your spend on the appliance just with a simple setting.
under this menu you will be allow to set 2 different power rates base on different time period
e.g. the power tariff in your area follows the table below, do the setting as following steps
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
Press OK, advance to tariff 1 time setting
Set RATE 1 value
Pr
Press OK, advance to tariff 2 time setting
Set RATE 2 value
Press HISTORY button to
switch between the 4 digits
2
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
Press +/- buttons to change the value
from 0~9, after correctly enter your
tariff, press OK to advance.
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
Set tariff 2 time
Press HISTORY button to
switch between the 4 digits