NorComp 180-701-170-000 Instruction Sheet
Read Online
Read the NorComp 180-701-170-000 Instruction Sheet online using the built-in PDF viewer.
Key Pages of Document
Page 1 of 3 Charlotte, NC Rev 8 11/15/2019 Date Printed 11/15/2019 PROPER USE GUIDELINES Cumulative Trauma Disorder can result from the prolonged use of manually powered hand tools. NorComp hand tools are intended for the occasional use and low volume applications. DMC BLUE RED CONTACT WIRE HAND TOOL SIZE RANGE INSULATION DIAMETER STRIP LENGTH (AWG) Max in. [mm] in. ...
Page 2 of 3 Charlotte, NC Rev 8 11/15/2019 Date Printed 11/15/2019 Tool Stationary Jaw Wire Strip Length Wire & Insulation should be visible in Inspection Window Figure 2 3. CRIMPING PROCEDURE Strip the wire to the length indicated, taking care not to nick or cut the wire strands. Select an applicable contact and identify the appropriate crimping chamber according ...
Page 3 of 3 Charlotte, NC Rev 8 11/15/2019 Date Printed 11/15/2019 2. The pivot pin and ratcheted pawl-bearing surface should be lubricated to ensure a smooth operation. DO NOT spray oil into tool to lubricate 3. When storing the tool, close the handles until the ratchet pawl is about to be released from the tooth of the ratchet. This will help prevent the dies from ...
