NETGEAR D8500 Do More
Text of NETGEAR D8500 Do More
WiFi Network Name and Password
The preassigned WiFi network name (SSID) and network key (password)
are unique to your modem router, like a serial number. Because the
modem router automatically uses WiFi security, you don’t need to set it
up. The WiFi settings are on the modem router’s label.
We recommend that you use the preset WiFi settings because you can
check the label if you forget them. You can also log in to the modem router
to change these se
Join the WiFi Network
You can either use Wi-Fi Protected Setup (WPS) or select your WiFi
network and type its password.
Join the WiFi Network Using WPS
For help with the WPS button on your WPS-enabled device, check the
instructions or online help that came with that computer or device. Some
older equipment cannot use WPS.
¾
¾
To join the network using WPS:
1. Press the WPS button on the modem router for three to five seconds.
The WPS LED on the modem
Join the WiFi Network Using the
Modem Router’s WiFi Settings
Use the modem router’s WiFi network name and password to connect your
WiFi-enabled computer or mobile device to the modem router through
WiFi. If you did not change the modem router’s WiFi network name and
password, the modem router’s WiFi network name and password are on
the modem router’s label.
¾
¾
To select your network and enter its password:
1. On your WiFi-enabled computer o
View or Change the Modem Router Settings
After you use the NETGEAR installation assistant to set up the
modem router, you can log in to the modem router to view or change its
settings.
Log In to the Modem Router
¾
¾
To log in to the modem router:
1. Connect a computer or mobile device to the modem router.
You can connect using an Ethernet connection or a WiFi connection:
•
Ethernet. To connect using an Ethernet connection, use an
Ethernet cable (not