Netgate SG-3100 Manual 

File Specifications

Brand: Netgate
Category: Gateway
Model: SG-3100 (Manual ), prC.wrLYOsa0I
File Type: PDF
File Size: —
Pages: 47 pages

Download PDF

Download Netgate SG-3100 Manual (47 pages)

Read Online:

Read the Netgate SG-3100 Manual  online using the built-in PDF viewer.

Key Pages of Document

OUT OF THE BOX

1 Getting Started 2 2 Initial Configuration 4 3 pfSense Overview 9 4 Input and Output Ports 13 5 Safety and Legal 16 6 Connecting to the Console Port 24 7 Reinstalling pfSense Software 30 8 M.2 SATA Installation 33 9 Configuring the Switch Ports 38 10 Additional Resources 44 11 Warranty and Support 45 i ...

Security Gateway Manual

SG-3100 This Quick Start Guide covers the first time connection procedures for the Netgate® SG-3100 Firewall Appliance and will provide the information needed to keep the appliance up and running. © Copyright 2020 Rubicon Communications LLC 1 ...

The basic firewall configuration begins with connecting the pfSense® appliance to the Internet. The pfSense appliance

should be unplugged at this time. Connect one end of an Ethernet cable to the WAN port (shown in the Input and Output Ports section) of the pfSense appliance. The other end of the same cable should be inserted i ...

Security Gateway Manual

SG-3100 Warning: The default IP Address on the LAN subnet on the pfSense firewall is 192.168.1.1/24. The same subnet cannot be used on both WAN and LAN, so if the default IP address on the ISP-supplied modem is also 192.168.1.1/24, disconnect the WAN interface until the LAN interface on the firewall has been renumbered to a differen ...

Plug the power cable into the power port (shown in the Input and Output Ports section) to turn on the pfSense Firewall.

Allow 4 or 5 minutes to boot up completely. 1. From the computer, log into the Web Interface Open a web browser (Google Chrome in this example) and type in 192.168.1.1 on the address bar. Press Enter. Fig. ...

Security Gateway Manual

SG-3100 Fig. 2: Click Advanced and then Proceed to 192.168.1.1 (unsafe) Fig. 3: Click Next © Copyright 2020 Rubicon Communications LLC 5 ...

Security Gateway Manual

SG-3100 DNS Servers: For purposes of this setup guide, use the Google public DNS servers (8.8.8.8 and 8.8.4.4). Fig. 4: Type in the DNS Server information and Click Next 4. Use the following information for the Time Server Information page. Time Server Hostname: Use the default pfSense time server address. Timezone: Select the time zo ...

Security Gateway Manual

SG-3100 Fig. 5: Change the Timezone and Click Next Fig. 6: Default Settings Should be Acceptable. Click Next © Copyright 2020 Rubicon Communications LLC 7 ...

Security Gateway Manual

SG-3100 Fig. 7: Read and Click Accept © Copyright 2020 Rubicon Communications LLC 8 ...

⚠️ Download Safety

The Gateway Manual  (47 pages) is completely safe to download (last scan date: 14/08/2026).

Related PDF Instructions for Netgate SG-3100: