NCR 7350-K804 Kit Instructions

NCR is a registered trademark of NCR Corporation. NCR SelfServ™Checkout is a trademark of NCR Corporation in the United States and/or other countries. Other product names mentioned in this publication may be trademarks or registered trademarks of their respective companies an ...

This publication provides procedures for installing a Handheld Scanner Mounting Arm on NCR SelfServ™Checkout (7350) R6L Narrow Core units. Note: Whether the SelfServ Checkout unit is configured as Left-hand (LH) orientation or Right-hand (RH) orientation, the Handheld Scanner Mounting Arm is installed on the side wit ...

Part Number Description 497-0477241 Handheld Scanner Mounting Arm 497-0476953 Space Pole Mount - Sp1 - 1.5" Diameter 497-0476958 Hand Scanner Mount Adapter 497-0455311 Bracket, Hand Scanner 006-8611143 Nut Keps, 8-32, Steel, Blue Zinc (6 Pcs) 497-0455362 Poron, Rubber, Handheld Scanner Mount 497-0455333 Mocap Part � ...

3 Installation Procedure To install the Handheld Scanner Mounting Arm, follow these steps: Note: Whether the SelfServ Checkout unit is configured as Left-hand (LH) orientation or Right-hand (RH) orientation, the Handheld Scanner Mounting Arm is installed on the side with the Basket Shelf. 1. Remove the following device ...

3. Do the following: a. Align the screw hole on the Handheld Scanner Mount Adapter with screw hole on the Space Pole Mount. b. Secure the assembly using one (1) screw. ...

5 4. Do the following: Note: Whether the SelfServ Checkout unit is configured as Left-hand (LH) orientation or Right-hand (RH) orientation, the Handheld Scanner Mounting Arm is installed on the side with the Basket Shelf. a. Align the Handheld Scanner Mounting Arm studs with the corresponding holes on the Tower Frame u ...