SEWOO LK-P32 Manual 

MOBILE PRINTER MODEL : LK-P32 P32 Rev. A 08/14 SEWOO TECH CO.,LTD. 374-2, Gajang-dong, Osan-si, Gyeonggi-do, 447-210, Korea TEL : +82-31-459-8200 FAX : +82-31-459-8880 www.miniprinter.com ...

1. Safety Caution 2 2. Unpacking 4 3. Product Overview 5 4. Usage and Installation 6 4-1. Control panel usage 6 4-2. Battery installation 10 4-3. Battery removal 11 4-4. Battery charging 12 4-5. Roll paper installation 13 4-6. Self test 14 5. Peripherals Connection 16 5-1. Bluetooth connection 16 5-2. Interface cable connection 17 6. Printer Specificaiton 18 6-1. Specification 18 ...

Read and follow the instructions carefully before running of the product. 1. Safety Caution WARNING Failure to follow these instructions could result in fire, electric shock, or other injuries, or property damage Indication Prohibition (Potential risk of electric shock or fire) (Potential risk of electric shock or fire) (Potential risk of electric shock or fire) (Potenti ...

Open button LCD Power button Battery USB Front Rear 2. Unpacking Paper feed button Control button Printer Printer Roll paper USB Cable Battery CD Standard Charger ...

4. Usage and Installation On Line No Paper Head Cover Open Printing On Line Bluetooth Battery No Paper Cover Open Now Printing ※ Emulation Information On Line ESCPOS Emulation Information On Line CPCL TPH Overheated Head Overheated 4-1-2. How to check the remaining power The battery lamp in LCD signify the remaining power. Low Battery Low Battery Full Low Battery Flat 4-1 Control panel usage Button Name ...

Media : Current Media Parameter Action/Explanation Current Media Displays the Media type that is currently set Media Type: Journal BlackMark Label To verify Media Type 1. Press button once to display the current Media type. Parameter Action/Explanation Auto Gap or BM (Black Mark) and BAT (Battery) Calibration Mode: Gap or BM Calibration BAT (Battery) Calibr ...

2. Push the battery into the printer until it locks in place. As the battery is not charged at the time of your purchase, charge the battery prior to using the printer (Use Battery charger or Cradle to charge) Hook 4-2 Battery installation Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions Remove the battery holding it up as shown above. ...

1. Unless the exclusive charger is used provided by the manufacturer, the printer can be damaged, and the manufacturer is not liable for the consequential damage. 2. Before removing the battery, make sure that power is turned off. 3. Printer does not work in the status of being connected with charger only. 4. The battery should be installed to operate printer. 5. While charging, do not turn on the power. 6. Do not operate the ...

power button for approximately 3 seconds. The printout is produced. While you are pressing the FEED button, press the power button 4-6 Self test When the printer is installed initially or when you face a problem, you can run the self test and check the information about -Control Circuit, Mechanism, Print Quality, ROM Version After checking with self-test and no issues are found, you can examine other devices and ...

communication. 2. By using Bluetooth function supported in PC, printer can be connected. This printer can communicate with peripheral devices via Bluetooth and cables. 5-1 Bluetooth connection 5. Peripherals Connection Refer to the Bluetooth Manual for more details on connection. 5-2 Interface cable connection 1. Connect USB into the cable connector on the printer. 2. Connect the ...

Character 9Type ( bitmap font) Character set ALPHA NUMERIC Character, Extension Character Barcode EAN-8, EAN-13, Code39, ITF, UPC-A, Codabar, Code93, Code128 Emulation ESC/POS, CPCL Command Compatible Driver Windows CE 6.0, Windows Mobile6.0, Android Sensor Paper End Sensor , Cover Open Sensor , Black Mark Sensor, Gap Sensor Paper Paper type Thermal Paper / Label ...