Rockler 38606 Instructions
Text of Rockler 38606 Instructions
Bed Rail Hook
with Pins Instructions
1
This hardware is for replacement
applications. It is NOT recommended
for new construction.
1. Determine where you want to
mount the hardware in both
post and rail.
Note: When the rail and post
are oriented as they will be
when assembled, the bottom
edges of their respective
mortises should align. This is
important for proper placement
of the hardware.
2. Mark and cut a 3/32" wide x 31⁄2"
long x 11⁄8" deep mort
Distributed by Rockler Companies, Inc.
©2016 Rockler Woodworking and Hardware
38606
Rev 01/16
the depth of the holes will
vary, depending on the post’s
thickness and on the mortise
placement. Be sure the holes
extend through the mortise and
back into the post to provide
adequate support for the pins.
10. Insert a 13⁄16"-long pin in each
mounting hole. Make sure the
pins pass through the mortise
and seat securely in the post.
11. Repeat Steps 1-10 fo