RightAngle R-Style Modesty Panel Instructions Manual
Text of RightAngle R-Style Modesty Panel Instructions Manual
R-Style Modesty Panel Instructions (RCM)
Warranty: raproducts.com/warranty
Instruction #53357 • Dated: 12/20/2018
1 of 6
R-Style Beam Assembly Instructions (RCB): Pages 4 - 6
K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
2 of 6
R-Style Modesty Panel & Beam #53357
Tools Required for Assembly
D. M6 x 1/2” Phillis Machine Screw x6
E. 10 X 5/8” Round Washer Head Recex Drive Screw x9
A. Power Driver with Adjustable Torque
B. #2 Phillips Head Driver Bit
C. #2 Square Head Drive Bit
A
B
C
D
E
Hardware Included for Assembly (may have extra)
Step 1
• Attach the modesty panel to the legs
with six m
K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
3 of 6
R-Style Modesty Panel & Beam #53357
E
• Attach the modesty panel and legs to the
worksurface with the wood screws.
Note: there are no pilot holes in the worksurface
for the modesty panel attachment. Predrilling is
not required.
A
C
E
E
Step 2
If you have optional threaded inserts in your worksurface, refer to the insert
instruction #54134.
K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
4 of 6
R-Style Modesty Panel & Beam #53357
R-Style Beam Assembly Instructions (RCB)
Warranty: raproducts.com/warranty
Instruction #53357 • Dated: 12/20/2018
R-Style Modesty Panel Instructions (RCM): Pages 1 - 3
K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
5 of 6
R-Style Modesty Panel & Beam #53357
Step 1
A
A
B
Remove and place beam
into slots on leg columns.
Detail A
E. M6 x 1/2” Machine Screw x4
F.
10 x 5/8” Round Washer Wood Screw x6
G. 3/16” x 3/4” Wood Screw x3
H. M6 x 9/16” Black Machine Screw x2
I.
5/64” x 1 3/8” Plate x2
Tools Required for Assembly
A. Power Driver with Adjustable Torque
B. #2 Phillips Head Dri
K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
6 of 6
R-Style Modesty Panel & Beam #53357
Step 2
Step 3 Optional Stability Panel
• Install the machine screws
into the legs and panel hardware.
H
I
A
B
C
F
G
H
Spread beam to align holes
at top of legs with inserts
in worksurface.
G
F
• Install wood screws.
• Install machine screws and
plate for final adjustment.
I
H
I
A
B
C
H
I
E
F
Detail F
E
If you have optional threaded