HP 6520s - Notebook PC Getting Started
Text of HP 6520s - Notebook PC Getting Started
© Copyright 2007 Hewlett-Packard Development
Company, L.P.
Windows is a U.S. registered trademark of
Microsoft Corporation. Bluetooth is a trademark
owned by its proprietor and used by Hewlett-
Packard Company under license.
The information contained herein is subject to
change without notice. The only warranties for HP
products and services are set forth in the express
warranty statements accompanying such
products and services. Nothing herein should be
This user guide describes features that are common to most models. Some
features may not be available on your computer.
iii
Table of contents
1 First-time setup
Identifying hardware for setup ........................................................................ 1
Setting up the computer .................................................................................. 2
Step 1: Insert the battery .............................................................. 3
Step 2: Connect the computer to external power ......................... 4
Step 3: Open the computer ...............
The computer is unable to start up ............................................. 26
The computer screen is blank .................................................... 27
Software is functioning abnormally ............................................. 27
The computer is turned on but not responding ........................... 28
The computer is unusually warm ................................................ 29
An external device is not working ..............
Identifying hardware for setup
To set up the computer for the first time, you will need the computer, the
AC adapter, the power cord, and the primary battery.
NOTE: Components included with the computer may vary by region or
country and by model.
Component
Component
(1)
Power cord
(3)
Primary battery
(2)
AC adapter
(4)
Modem cable (select models only)
NOTE: Use only the AC adapter provided with the computer or one
approved for this compu
Setting up the computer
CAUTION: To reduce the risk of file corruption, observe the following
practices during the hardware and software setup procedures:
Do not unplug the computer from external power.
Do not shut down the computer or initiate Sleep or Hibernation.
Computer setup involves the following tasks:
1.
Inserting the battery into the computer
2.
Connecting the computer to external power
NOTE: The battery begins to charge.
3.
Turning on the comput
Step 1: Insert the battery
To insert the battery:
1.
Turn the computer upside down on a flat surface, with the battery bay
toward you.
2.
Insert the battery into the battery bay (1) until it is seated.
The battery release latches (2) automatically lock the battery into
place.
Setting up the computer
3