Semtech Lora Mote Operation & User’s Manual
Text of Semtech Lora Mote Operation & User’s Manual
1 of 15
Semtech
LoRaMoteConfig
User Guide
Rev 1.2
UG001_SXC_V1.2
December 2016
Lora Mote / Mote II
www.semtech.com
LoRaMoteConfig
User Guide
2 of 15
Semtech
www.semtech.com
Revision History
Version
Date
Changes and/or Modifications
Rev 1.2
December 2016
Update with the Mote II requirements
Rev 1.1
Novmber 2015
Modifications to reflect Release 1.1 of the utility
Rev 1.0
July 2015
New document
3 of 15
Semtech
www.semtech.com
Contents
Revision History ................................................................................................................................................................................................................................. 2
1. Scope......................................................................................................
4 of 15
Semtech
www.semtech.com
1. Scope
The goal of this document is to describe the use of the PC utility named “LoRaMoteConfig”.
Figure 1-1: LoRaMote Config Welcome Screen
LoRaMoteConfig is useful to control PHY, MAC and application-related parameters of the firmware running in the
LoRaMote. Examples:
•
Change channels
•
Change activation method (personalization or activation over t
5 of 15
Semtech
www.semtech.com
2. Installation
2.1 Prerequisite
Please download the latest LoRaMoteConfig installer file from the Semtech web repository.
The requirements are:
•
a Personal Computer running Windows 7 (tested), Windows 8 (untested) or Windows 10 (untested)
•
ST Microelectronics Virtual Com Port (VCP)
•
DfuSe drivers for bootloader mode, this is only needed for the LoRa Mo
6 of 15
Semtech
www.semtech.com
2.2 Step 1: Install LoRaMoteConfig
Double click the installer “LoRaMoteConfigSetup.exe” and follow the on-screen instructions. The .NET Framework will be
installed automatically if not already present on the machine. The required material is available in the installation directory:
Figure 2-3: Installation Directory
2.3 Step 2: Install STM VCP Drivers
In ord
7 of 15
Semtech
www.semtech.com
2.4 Step 3: Upgrade the Firmware
2.4.1 LoraMote Firmware Upgrade
2.4.1.1 Install the DfuSe 3.0.5 Utility in the LoRaMote
•
This utility is required to re-flash the LoRaMote without the use of a JTAG programmer. Simply navigate to the /dfuse
subdirectory, double-click “DfuSe_Demo_V3.0.5_Setup.exe” and follow the on-screen instructions.
•
Launch “DfuSeDe